Std: Aliniere

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Std Alignment and the translation is 9% complete.
Outdated translations are marked like this.

Std Alignment

Menu location
Edit → Alignment...
Workbenches
All
Default shortcut
None
Introduced in version
-
See also
Placement

Descriere

Această funcție vă permite să poziționați și să orientați două forme selectate, prin alinierea a două sau mai multe puncte selectate, pe fiecare dintre aceste două forme diferite, una cu cealaltă. Funcționează în toate atelierele de lucru.

The command interface after two point pairs have been defined

Usage

  1. Select the reference object. This will be the fixed object and not be changed.
  2. Hold down the Ctrl key while you select the object whose placement you want to change.
  3. Select the Edit → Alignment... option from the menu.
  4. A new window will appear in the Main view area. This window consists of two views: on the left the movable object is displayed and on the right the fixed object.
  5. Define the first point pair by clicking a point in each view. This point pair is used to move the movable object.
  6. Define one or two more point pairs if you also want to rotate the movable object.
  7. Right-click one of the views and select the Align option from the context menu to complete the command.

Options

The following additional options are available in the context menu:

  • Select the Remove last point option to remove the last point in the view.
  • Select the Cancel option to abort the command.
  • Check the Syncronize views option if any view changes (pan, rotate and zoom) should be applied to both views.