User contributions for Vocx
3 November 2020
- 22:1222:12, 3 November 2020 diff hist +212 Video tutorials for product design FreeCAD for Beginners: a series of videos by DrVax, introducing FreeCAD 0.19, and using it for 3D printing with Cura and PrusaSlicer.
16 October 2020
- 00:4300:43, 16 October 2020 diff hist +181 Sketcher Workbench Decrease B-spline degree, currently this command is not implemented. (v0.19)
15 October 2020
- 17:3417:34, 15 October 2020 diff hist 0 Sketcher Workbench Change the order of the commands
- 17:1317:13, 15 October 2020 diff hist +1,339 N Sketcher StopOperation Stop operation stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.
- 16:3516:35, 15 October 2020 diff hist +82 N File:Sketcher StopOperation.svg Same as "process-stop.svg"; use this name to match the command name. current
- 16:3116:31, 15 October 2020 diff hist +184 Sketcher Workbench Stop operation: when in edit mode, stop the current operation, whether that is drawing, setting constraints, etc.
14 October 2020
- 01:0101:01, 14 October 2020 diff hist +31 Artwork MeshPart File:MeshPart_CurveOnMesh.svg
- 01:0101:01, 14 October 2020 diff hist +145 N File:MeshPart CurveOnMesh.svg New icon added in v0.19. It is the same as "Surface_CurveOnMesh.svg" but using the green tone of the Mesh and MeshPart workbenches. current
13 October 2020
- 05:0005:00, 13 October 2020 diff hist +24 Artwork MeshPart Correct path "icons/actions" are in lowercase; the icons are shown at their original size.
12 October 2020
- 00:2100:21, 12 October 2020 diff hist +34 Part Module File:Part_ColorFace.svg, for the Part_ColorPerFace command.
- 00:2000:20, 12 October 2020 diff hist −20 Part FaceColors Do not center the image. Left aligned is fine.
- 00:1200:12, 12 October 2020 diff hist −1 Part Module Part_ProjectionOnSurface.svg instead of PNG
- 00:1000:10, 12 October 2020 diff hist 0 File:Part CompoundFilter.svg Vocx uploaded a new version of File:Part CompoundFilter.svg current
- 00:0900:09, 12 October 2020 diff hist 0 File:Part Thickness.svg Vocx uploaded a new version of File:Part Thickness.svg
- 00:0800:08, 12 October 2020 diff hist +664 Artwork Part Organize the icons in new folders, new in v0.19; booleans, create, measure, parametric, tools
- 00:0400:04, 12 October 2020 diff hist +69 N File:Part 2D object.svg Basic icon for the viewprovider of Part::Part2DObjects.
11 October 2020
- 23:5923:59, 11 October 2020 diff hist +144 N File:Part FeatureImport.svg Big icon 64x64 px for this icon that appears when an Python object (feature) cannot be loaded from a specified path in the object.
- 23:4823:48, 11 October 2020 diff hist 0 File:Part Feature.svg Vocx uploaded a new version of File:Part Feature.svg
- 23:4623:46, 11 October 2020 diff hist +35 N File:PartFeature.svg Vocx moved page File:PartFeature.svg to File:Part Feature.svg: This is the correct name that it has in the source code. current Tag: New redirect
- 23:4623:46, 11 October 2020 diff hist 0 m File:Part Feature.svg Vocx moved page File:PartFeature.svg to File:Part Feature.svg: This is the correct name that it has in the source code.
- 23:4023:40, 11 October 2020 diff hist +156 N File:Part Shape from Mesh.svg This is the original name of the icon in the source code, so the wiki should have this name exactly. The command name is "Part_ShapeFromMesh". current
- 23:2623:26, 11 October 2020 diff hist +37 Part Module Icon Part_ReverseShapes.svg
- 23:2523:25, 11 October 2020 diff hist −15 Part ReverseShape Remove |Empty=1 so that it picks the icon automatically
- 23:2423:24, 11 October 2020 diff hist +69 N File:Part Reverse Shape.svg New icon in v0.19 for the command "Part_ReverseShapes". current
- 23:1923:19, 11 October 2020 diff hist 0 File:Part ProjectionOnSurface.svg Vocx uploaded a new version of File:Part ProjectionOnSurface.svg
- 23:1523:15, 11 October 2020 diff hist +113 N File:Part ColorFace.svg Icon for the "Part_ColorPerFace" tool which was deactivated in v0.13, but is available in the menu.
- 23:1323:13, 11 October 2020 diff hist +83 N File:Part Tube Parametric.svg Parametric icon for this tool which is added to the toolbar in v0.19. current
- 22:4422:44, 11 October 2020 diff hist 0 File:Sketcher Move.svg Vocx uploaded a new version of File:Sketcher Move.svg
- 20:4820:48, 11 October 2020 diff hist +58 Pivy →Older: These links provide reference documentation for Coin v3.x. The differences with v4.x are minimal, so they may still be useful.
- 19:0419:04, 11 October 2020 diff hist +254 Pivy latest automatically generated Doxygen documentation.
- 18:4318:43, 11 October 2020 diff hist +83 PartDesign Body Button template for better presentation of the mentioned commands
8 October 2020
- 01:4101:41, 8 October 2020 diff hist −5 Part ProjectionOnSurface Given a source Shape, this tool can project edges, wires (closed edges), or entire faces from it;
- 01:3701:37, 8 October 2020 diff hist +1 m Part ProjectionOnSurface Given a source Shape, this tool can project entire faces, or only a collection of edges from it;
- 01:2301:23, 8 October 2020 diff hist +166 Part ProjectionOnSurface Given a source Shape, this tool can project entire face, or only a collection of edges from it; the result can be new edges, new faces, or even new extruded solids which can be used in further boolean operations for effects such as engraving or stamping.
7 October 2020
- 21:4821:48, 7 October 2020 diff hist +64 Getting started Tutorials, Video tutorials
5 October 2020
- 18:1318:13, 5 October 2020 diff hist +1,395 Release notes 0.19 The TechDraw Workbench has been upgraded in an important way. It has many new features with respect to v0.18, which make it much more useful to produce technical illustrations of 3D solids.
- 17:2617:26, 5 October 2020 diff hist +186 N File:FreeCAD highlight 4 0.19.png Same as "Techdraw_ballon.png"; use this name because it will be used to highlight the development of v0.19. We want it to be a static image, so it doesn't change over time. current
- 17:2017:20, 5 October 2020 diff hist +205 Release notes 0.19 The center marks created from circular edges, can now be printed;
4 October 2020
- 05:5205:52, 4 October 2020 diff hist +580 Release notes 0.19 The Surface Workbench documentation has been rewritten, and expanded with more images and scripting examples, in order to showcase better the tools of the workbench.
- 05:2305:23, 4 October 2020 diff hist +277 Surface GeomFillSurface →Twisting of the surface: When the surface's Lighting property is One side, a face will be painted completely black if its normal direction points into the 3D view (away from the current viewer), indicating a flipped face with respect to the other colored faces.
- 05:1005:10, 4 October 2020 diff hist −36 Surface GeomFillSurface Removed UnfinishedDocu template because the information has more or less been updated.
- 05:1005:10, 4 October 2020 diff hist +529 Surface Sections Twisting of the surface: The shape of the surface depends on the direction of the chosen edges; if edges are selected and the result is a surface that "twists" on itself, one of the edges may need its list of vertices in the reverse order.
- 05:0305:03, 4 October 2020 diff hist +617 Surface GeomFillSurface →Twisting of the surface: Left: the boundary edges are oriented in the same direction, and thus the generated surface is smooth. Right: the boundary edges have opposite directions, and thus the generated surface twists on itself, resulting in self-intersections.
- 04:5704:57, 4 October 2020 diff hist +200 Part TopoShape You can obtain a quick summary of all methods using Python's built-in help() function.
- 04:4404:44, 4 October 2020 diff hist +95 N File:Surface twisting example twisted.png Example of a twisted surface where the edges are oriented in opposite directions. current
- 04:4304:43, 4 October 2020 diff hist +93 N File:Surface twisting example smooth.png Example of a smooth surface where the edges are oriented in the same direction. current
- 04:3604:36, 4 October 2020 diff hist +12 Surface GeomFillSurface Surface GeomFillSurface creates a parametric surface from two, three, or four boundary edges, trying to create a smooth transition between them.
- 04:2604:26, 4 October 2020 diff hist +33 Surface GeomFillSurface Moved the "Twisting" section before the scripting section
- 04:2404:24, 4 October 2020 diff hist +13 Surface GeomFillSurface →Twisting: Section on twisting of the surface
- 04:2404:24, 4 October 2020 diff hist +1,211 Surface GeomFillSurface The shape of the surface depends a lot on the direction of the chosen edges; if various edges are selected and the result is a surface that "twists" on itself, one of the edges may need its list of vertices in the reverse order.
- 03:2603:26, 4 October 2020 diff hist +490 Surface GeomFillSurface Left: edges that are used to generate a surface with the GeomFillSurface tool, 4 connected edges, 3 connected edges, and 2 disconnected edges. Right: resulting surface from using the 4, 3, and 2 edges, respectively.
- 03:2203:22, 4 October 2020 diff hist +85 N File:Surface GeomFillSurface 2 edges example.png Surface created from two edges with the "Surface_GeomFillSurface" tool. current
- 03:2203:22, 4 October 2020 diff hist +75 N File:Surface GeomFillSurface 2 edges.png Two edges to be used with the "Surface_GeomFillSurface" tool. current
- 03:2103:21, 4 October 2020 diff hist +97 N File:Surface GeomFillSurface 3 edges example.png Surface created from three connected edges with the "Surface_GeomFillSurface" tool. current
- 03:2003:20, 4 October 2020 diff hist +87 N File:Surface GeomFillSurface 3 edges.png Three connected edges to be used with the "Surface_GeomFillSurface" tool. current
- 03:2003:20, 4 October 2020 diff hist +96 N File:Surface GeomFillSurface 4 edges example.png Surface created from four connected edges with the "Surface_GeomFillSurface" tool. current
- 03:1903:19, 4 October 2020 diff hist +86 N File:Surface GeomFillSurface 4 edges.png Four connected edges to be used with the "Surface_GeomFillSurface" tool. current
- 03:0503:05, 4 October 2020 diff hist +2,489 Surface GeomFillSurface Surface GeomFillSurface creates a surface from two, three or four boundary edges, trying to create a smooth transition between them.
- 02:4802:48, 4 October 2020 diff hist +2 Surface Sections NSections: a list of edges that will be used to build the surface.
3 October 2020
- 23:5423:54, 3 October 2020 diff hist −3 Surface Sections |MenuLocation=Surface → Sections
- 23:5423:54, 3 October 2020 diff hist −3 Surface Filling |MenuLocation=Surface → Filling
- 23:3823:38, 3 October 2020 diff hist +2 Surface CurveOnMesh MenuLocation=Surface → Curve on mesh
- 23:3623:36, 3 October 2020 diff hist −37 Surface ExtendFace Removed UnfinishedDocu template because the information has more or less been updated.
- 23:3523:35, 3 October 2020 diff hist −36 Surface Filling Removed UnfinishedDocu template because the information has more or less been updated.
- 23:3423:34, 3 October 2020 diff hist −36 Surface CurveOnMesh Removed UnfinishedDocu template because the information has more or less been updated.
- 23:3223:32, 3 October 2020 diff hist −36 Surface Workbench Removed UnfinishedDocu template because the information has more or less been updated.
- 06:5706:57, 3 October 2020 diff hist +197 Surface CurveOnMesh Above left: mesh object with selected points on the surface. Above right: splines created by picking several points on the mesh. Lower left: a parametric surface reconstructed from the approximated splines, using Surface Sections.
- 06:3706:37, 3 October 2020 diff hist +122 N File:Surface CurveOnMesh surface example.png Parametric surface reconstructed from the approximation splines generated from the Surface_CurveOnMesh tool. current
- 06:3606:36, 3 October 2020 diff hist +118 N File:Surface CurveOnMesh example.png Approximation splines generated from selected points on top of a mesh, for the Surface_CurveOnMesh tool. current
- 06:3506:35, 3 October 2020 diff hist +82 N File:Surface CurveOnMesh mesh example.png Selection points on top of a mesh, for the Surface_CurveOnMesh tool. current
- 06:1006:10, 3 October 2020 diff hist −22 m Surface CurveOnMesh Press the curve on mesh button
- 00:4200:42, 3 October 2020 diff hist +821 Surface CurveOnMesh If Spline approximation is checked, the Curve on mesh tool creates a Part Spline which is derived from the basic Part Feature
- 00:3700:37, 3 October 2020 diff hist +192 N File:Part Spline.svg Same as "Part_Spline_Parametric.svg". Use this name to match the command name, although currently there is no command to create this object, except through the Surface Workbench. current
- 00:2700:27, 3 October 2020 diff hist +1,330 Surface CurveOnMesh Information of the options of the tool; this information needs to be verified by looking exactly at the source code. Otherwise it's hard to infer what the options really mean.
2 October 2020
- 23:2923:29, 2 October 2020 diff hist −64 Surface CurveOnMesh Depending on how smooth the original mesh is, one spline or multiple splines will be created in the tree view.
- 23:0423:04, 2 October 2020 diff hist +784 Surface Filling Limitations section taken from the main Surface Workbench page, as these limitations mostly apply to this Filling tool
- 22:5922:59, 2 October 2020 diff hist −486 Surface Workbench Move limitations section to Surface_Filling, as they mostly apply to it
- 22:2822:28, 2 October 2020 diff hist +701 Surface Filling Better description of the non-boundary edges, and non-boundary vertices.
- 22:2422:24, 2 October 2020 diff hist +256 Surface Workbench Better explanations and icons
- 21:3921:39, 2 October 2020 diff hist −47 Surface Filling Curvature: non-boundary edges, Curvature: non-boundary vertices
- 20:1920:19, 2 October 2020 diff hist +26 Surface Filling The sections will be called "Boundary edges", "Non-boundary edges", "Non-boundary vertices"
- 19:0119:01, 2 October 2020 diff hist −24 Surface CurveOnMesh Clear: it will erase the tentative points that have been picked on the mesh, and will allow you to pick new ones.
- 18:5418:54, 2 October 2020 diff hist +537 Surface CurveOnMesh Left: mesh object with selected points on the surface. Right: splines created by picking several points. For future addition of images.
- 18:4018:40, 2 October 2020 diff hist +1,894 Surface CurveOnMesh More clear steps on how to use the tool
- 15:5615:56, 2 October 2020 diff hist +407 Surface CurveOnMesh Surface_CurveOnMesh creates approximated spline segments on top of a selected mesh. If the object is not a Mesh, but a parametric Shape or surface, it must be converted first to a mesh.
- 07:3107:31, 2 October 2020 diff hist +76 Part ShapeFromMesh The inverse operation is Mesh FromPartShape from the Mesh Workbench.
- 07:3007:30, 2 October 2020 diff hist +307 Mesh FromPartShape The inverse operation is Part ShapeFromMesh from the Part Workbench.
- 07:2607:26, 2 October 2020 diff hist +72 Surface Workbench If the object is not a Mesh, but a parametric Shape, it must be converted to a mesh using Mesh FromPartShape.
- 07:2407:24, 2 October 2020 diff hist +131 Part ShapeFromMesh The inverse operation is Mesh FromPartShape.
1 October 2020
- 23:5623:56, 1 October 2020 diff hist +21 LinkSubList See also: FreeCAD Scripting Basics, LinkSub.
- 23:5523:55, 1 October 2020 diff hist +2,587 N LinkSub A LinkSub is a data structure that is used as input to various functions and objects; its purpose is to pass a subobject or subelement (vertex, edge, or face) from an object to another object that will use or transform that geometry.
- 23:4223:42, 1 October 2020 diff hist +4 LinkSubList Use Vertex instead of Face
- 23:4023:40, 1 October 2020 diff hist +237 LinkSubList It is important to recompute the objects before their subelements are used as input for other objects, otherwise an error may be produced as the geometry may not contain a valid Shape.
- 23:3623:36, 1 October 2020 diff hist +148 LinkSubList It is possible to see that a LinkSubList is a list of LinkSub structures. Each tuple is in fact a LinkSub.
- 23:3223:32, 1 October 2020 diff hist +11 LinkSubList The second element of the tuple can itself be a list of strings, indicating various subelements of the same document object.
- 23:2723:27, 1 October 2020 diff hist −6 App DocumentObject It is usually better to subclass one of the more complex classes,
- 23:2323:23, 1 October 2020 diff hist +31 LinkSubList Each tuple contains at least two elements; the first element is a reference to a document object
- 23:0723:07, 1 October 2020 diff hist −15 Surface ExtendFace →Usage: The object could be created with the Surface Workbench but it could also be any other object, for example, created with Part or PartDesign.
- 23:0323:03, 1 October 2020 diff hist +48 Surface ExtendFace →Description: Surface_ExtendFace_base_example.png, Surface_ExtendFace_example.png
- 23:0123:01, 1 October 2020 diff hist +93 N File:Surface ExtendFace example.png Resulting surface after using "Surface_ExtendFace" command with a base surface. current
- 23:0123:01, 1 October 2020 diff hist +71 N File:Surface ExtendFace base example.png Base surface for using with "Surface_ExtendFace" command. current
- 22:3722:37, 1 October 2020 diff hist +21 Surface ExtendFace →Scripting: One less point for the example surface
- 22:2922:29, 1 October 2020 diff hist −264 Surface ExtendFace →Scripting: Improved code, less lines so it's more readable
- 22:2122:21, 1 October 2020 diff hist +145 Surface ExtendFace →Scripting: Better script
- 22:1322:13, 1 October 2020 diff hist +345 Surface ExtendFace →Data: More information
- 21:5821:58, 1 October 2020 diff hist +382 Surface ExtendFace →Usage: Make sure you have an object that has faces. The object doesn't need to be a surface created with the Surface Workbench, it can be any solid object, for example, created with Part or PartDesign
- 21:4621:46, 1 October 2020 diff hist −5 Template:Surface Tools navi Filling, Fill boundary curves, Sections, Extend face, Curve on mesh
- 18:4418:44, 1 October 2020 diff hist −5 PySide Small changes
- 18:4018:40, 1 October 2020 diff hist −2 PySide If you are compiling yourself then you must verify that these two libraries are installed in order for FreeCAD to run correctly
- 18:3918:39, 1 October 2020 diff hist +34 PySide Python
- 05:0705:07, 1 October 2020 diff hist +1 Surface Workbench Extend face: extrapolates the surface at the boundaries with its local u-parameter and v-parameter.
- 05:0405:04, 1 October 2020 diff hist +33 Artwork Surface Surface_CurveOnMesh.svg, new icon in v0.19 for the existing command "Surface_CurveOnMesh".
- 05:0305:03, 1 October 2020 diff hist +79 N File:Surface CurveOnMesh.svg New icon in v0.19 for the existing command "Surface_CurveOnMesh".
- 04:4604:46, 1 October 2020 diff hist +35 Surface Workbench File:Surface_CurveOnMesh.svg
- 04:4504:45, 1 October 2020 diff hist +53 Surface CurveOnMesh MenuCommand template
30 September 2020
- 23:4923:49, 30 September 2020 diff hist +3 Surface ExtendFace →Properties: A Surface Extend object is derived from the basic Part Feature class.
- 23:4823:48, 30 September 2020 diff hist −776 Surface ExtendFace →Data: Properties
- 22:5322:53, 30 September 2020 diff hist −129 Artwork Surface Remove the old icons
- 22:5122:51, 30 September 2020 diff hist +86 N File:Surface ExtendFace.svg Same as "Surface_Extend.svg"; use this name to match the command's name.
- 16:4616:46, 30 September 2020 diff hist 0 Surface Workbench Vertices not vertexes
- 06:3606:36, 30 September 2020 diff hist +105 Surface ExtendFace Correct name Name=Surface ExtendFace
- 06:3306:33, 30 September 2020 diff hist +37 Surface Workbench File:Surface_ExtendFace.svg
- 06:3206:32, 30 September 2020 diff hist +263 Surface Filling Surface Filling creates a surface from a series of connected boundary edges.
- 06:2806:28, 30 September 2020 diff hist −1 m Surface Workbench remove space
- 06:2806:28, 30 September 2020 diff hist +82 Surface GeomFillSurface Button template
- 06:2606:26, 30 September 2020 diff hist +46 Surface Sections →Description: Button template
- 06:2506:25, 30 September 2020 diff hist +14 Surface GeomFillSurface |Version=0.17
- 06:2406:24, 30 September 2020 diff hist +4,756 N Surface ExtendFace Surface Extend extrapolates an existing face or surface at its boundaries with its local U and V parameters.
- 06:0606:06, 30 September 2020 diff hist −64 Surface Filling →Scripting: Better code with better points
- 06:0106:01, 30 September 2020 diff hist +147 Surface Filling →Scripting: Better code. With control vertices.
- 05:3105:31, 30 September 2020 diff hist +434 Surface Sections →Properties: A Surface Sections is derived from the basic Part Feature, therefore it shares all the latter's properties.
- 05:2405:24, 30 September 2020 diff hist +1 Surface Filling Remove edge: press once to start picking edges in the 3D view; these must be edges that were previously picked with Add edge.
- 05:2405:24, 30 September 2020 diff hist +4 Surface Sections →Options: Remove edge: press once to start picking edges in the 3D view; these must be edges that were previously picked with Add edge.
- 05:1905:19, 30 September 2020 diff hist +1 Surface Filling →Scripting: All objects with edges need to be computed before they can be used as input for the properties of the Filling object.
- 05:1905:19, 30 September 2020 diff hist +123 Surface Sections →Scripting: All objects with edges need to be computed before they can be used as input for the properties of the Sections object.
- 05:1905:19, 30 September 2020 diff hist +119 Surface Filling →Scripting: All objects with edges need to be computed before they can be used as input for the properties of the Filling object.
- 05:1805:18, 30 September 2020 diff hist 0 m Surface Sections →Scripting: small changes
- 05:1705:17, 30 September 2020 diff hist +2,290 Surface Filling All properties of the object
- 05:0605:06, 30 September 2020 diff hist 0 m Part Feature Link
- 04:4204:42, 30 September 2020 diff hist +1,352 Surface Filling Information on the function of the task panel.
- 04:3404:34, 30 September 2020 diff hist +1,975 Surface Filling Complete code example
- 03:1703:17, 30 September 2020 diff hist −3 Surface Workbench Remove ellipsis
- 03:1603:16, 30 September 2020 diff hist +787 Surface Filling The base edges that form the closed contour, as well as the auxiliary vertices and edges, can belong to 2D curves but can also belong to 3D solid objects.
- 02:1702:17, 30 September 2020 diff hist +102 Surface Filling More complete description of the usage
- 01:1301:13, 30 September 2020 diff hist +852 Surface Filling More detailed steps
29 September 2020
- 23:4423:44, 29 September 2020 diff hist 0 File:Workbench Surface.svg Vocx uploaded a new version of File:Workbench Surface.svg
- 23:2923:29, 29 September 2020 diff hist +3 Surface Filling Remove the |Icon parameter to automatically find the command name
- 23:2623:26, 29 September 2020 diff hist +5 Surface GeomFillSurface Proper command name to find the correct icon name
- 23:2323:23, 29 September 2020 diff hist 0 File:Surface Sewing.svg Vocx uploaded a new version of File:Surface Sewing.svg
- 23:0323:03, 29 September 2020 diff hist 0 File:Surface Sewing.svg Vocx uploaded a new version of File:Surface Sewing.svg
- 22:5422:54, 29 September 2020 diff hist +20 Surface Workbench The icons' names match the commands' names.
- 22:5322:53, 29 September 2020 diff hist +95 N File:Surface GeomFillSurface.svg Same icon as "Surface_BSplineSurface". Use this name to match the command's name.
- 22:5122:51, 29 September 2020 diff hist +245 Artwork Surface New set of icons, updated in v0.19.
- 22:5122:51, 29 September 2020 diff hist +119 N File:Surface Workbench.svg New icon updated in v0.19. Previously a hard-coded XPM was used, now it's the same as the 'Surface' icon.
- 22:5022:50, 29 September 2020 diff hist +40 N File:Surface Surface.svg New icon updated in v0.19.
- 22:5022:50, 29 September 2020 diff hist +40 N File:Surface Sewing.svg New icon updated in v0.19.
- 22:4922:49, 29 September 2020 diff hist 0 File:Surface Sections.svg Vocx uploaded a new version of File:Surface Sections.svg
- 22:4922:49, 29 September 2020 diff hist +40 N File:Surface Filling.svg New icon updated in v0.19.
- 22:4922:49, 29 September 2020 diff hist +40 N File:Surface Cut.svg New icon updated in v0.19.
- 22:4822:48, 29 September 2020 diff hist +40 N File:Surface BSplineSurface.svg New icon updated in v0.19.
- 22:4822:48, 29 September 2020 diff hist +40 N File:Surface BezierSurface.svg New icon updated in v0.19.
- 02:1502:15, 29 September 2020 diff hist +131 Surface Workbench Button template for better presentation of the mentioned commands
- 02:1202:12, 29 September 2020 diff hist −2 Surface Workbench Surface Tools navi to categorize the page
- 02:1002:10, 29 September 2020 diff hist −17 Surface Workbench Remove "Thumb" option from image. It will stay in place.
28 September 2020
- 15:2215:22, 28 September 2020 diff hist +96 BIM Workbench See FreeCAD BIM migration guide.
- 15:2115:21, 28 September 2020 diff hist +95 Arch Workbench See FreeCAD BIM migration guide
- 06:1106:11, 28 September 2020 diff hist +81 N File:Surface Sections.svg Icon for the "Surface_Sections" command, newly introduced in v0.19.
- 06:1006:10, 28 September 2020 diff hist −31 Artwork Surface Surface Tools navi to categorize the page
- 00:2800:28, 28 September 2020 diff hist +1,313 Surface Sections →Usage: Options describing Add edge and Remove edge
- 00:0600:06, 28 September 2020 diff hist +47 Draft BSpline closed=False for the code.
- 00:0200:02, 28 September 2020 diff hist +191 Draft BSpline Button template for better presentation of the mentioned commands
27 September 2020
- 23:3823:38, 27 September 2020 diff hist +14 Release notes 0.19 Link to Asymptote
- 23:1423:14, 27 September 2020 diff hist +232 Asymptote →Generating Asymptote code from FreeCAD.
- 23:0723:07, 27 September 2020 diff hist +261 Release notes 0.19 The developers of Draft, Arch, and BIM Workbenches also collaborate with the greater OSArch community, with the ultimate goal of improving building design by using entirely free software.
- 23:0023:00, 27 September 2020 diff hist +330 Release notes 0.19 The Surface Sections object has been added to create surfaces from edges that represent transversal sections.
- 22:5322:53, 27 September 2020 diff hist +71 Surface Sections →Description: Surface_Sections_edges_example.png, Surface_Sections_example.png
- 22:4922:49, 27 September 2020 diff hist +64 N File:Surface Sections example.png Example of "Surface_Section" object, new in v0.19. current
- 22:4922:49, 27 September 2020 diff hist +75 N File:Surface Sections edges example.png Edges used to built a "Surface_Section" object, new in v0.19. current
- 22:3422:34, 27 September 2020 diff hist +16 Surface Sections →Scripting: doc.recompute() missing
- 22:0022:00, 27 September 2020 diff hist +2,253 N LinkSubList A LinkSubList is a data structure that is used as input to various functions and objects; its purpose is to pass a subobject or subelement (vertex, edge, or face) from an object to another object that will use or transform that geometry.
- 20:5220:52, 27 September 2020 diff hist +703 Surface Sections →Scripting: More complete example
- 19:3419:34, 27 September 2020 diff hist +1,868 N Surface Sections Surface Sections is used to create a surface from edges that represent transversal sections of surface.
- 18:5718:57, 27 September 2020 diff hist +351 Object name When using expressions, the Label can be referenced using double brackets made of the less than and greater than symbols.
- 18:2618:26, 27 September 2020 diff hist +162 Surface Workbench Sections: creates a surface from edges that represent transversal sections of surface. New in v0.19.
- 18:2318:23, 27 September 2020 diff hist −10 Template:Userdocnavi Surface
- 18:2118:21, 27 September 2020 diff hist +135 Part Module Tube: draws a tube by specifying its internal radius and external radius.
- 18:2118:21, 27 September 2020 diff hist +78 N File:Part Tube.svg New icon for the Tube feature. The icon was introduced in v0.19. current
- 06:5706:57, 27 September 2020 diff hist −48 Sketcher DeleteAllConstraints Remove Icon, now it finds the icon automatically
- 06:5606:56, 27 September 2020 diff hist 0 File:Sketcher DeleteAllGeometry.svg Vocx uploaded a new version of File:Sketcher DeleteAllGeometry.svg
- 06:5506:55, 27 September 2020 diff hist 0 File:Sketcher DeleteAllConstraints.svg Vocx uploaded a new version of File:Sketcher DeleteAllConstraints.svg
- 06:5306:53, 27 September 2020 diff hist +77 Artwork Sketcher Sketcher_DeleteConstraints.svg, Sketcher_DeleteGeometry.svg; new icons used for existing tools
- 06:5206:52, 27 September 2020 diff hist +84 N File:Sketcher DeleteGeometry.svg New icon in v0.19 for the existing tool, "Sketcher_DeleteAllGeometry".
- 06:5206:52, 27 September 2020 diff hist +86 N File:Sketcher DeleteConstraints.svg New icon in v0.19 for the existing tool "Sketcher_DeleteAllConstraints".
- 06:3106:31, 27 September 2020 diff hist 0 File:Sketcher SelectElementsAssociatedWithConstraints.svg Vocx uploaded a new version of File:Sketcher SelectElementsAssociatedWithConstraints.svg
- 06:3106:31, 27 September 2020 diff hist 0 File:Sketcher SelectConstraints.svg Vocx uploaded a new version of File:Sketcher SelectConstraints.svg
- 06:3006:30, 27 September 2020 diff hist 0 File:Sketcher SelectRedundantConstraints.svg Vocx uploaded a new version of File:Sketcher SelectRedundantConstraints.svg
- 06:2906:29, 27 September 2020 diff hist 0 File:Sketcher SelectConflictingConstraints.svg Vocx uploaded a new version of File:Sketcher SelectConflictingConstraints.svg
26 September 2020
- 21:0421:04, 26 September 2020 diff hist +7 Sketcher Workbench Button template
- 20:4920:49, 26 September 2020 diff hist −1 Sketcher Workbench File:Sketcher_SwitchVirtualSpace.svg
- 20:4720:47, 26 September 2020 diff hist +22 Sketcher SwitchVirtualSpace if you decide to set constraints on the second virtual space, don't forget about them later on if you don't see them in the 3D view.
- 20:3320:33, 26 September 2020 diff hist +135 Sketcher BSplineDecreaseKnotMultiplicity Button template
- 20:3120:31, 26 September 2020 diff hist +134 Sketcher BSplineIncreaseKnotMultiplicity Button template
- 20:2920:29, 26 September 2020 diff hist +242 Sketcher BSplineIncreaseDegree Remove Icon, now it finds the icon automatically; at the moment there is no B-spline decrease degree command
- 18:5218:52, 26 September 2020 diff hist +157 Sketcher Workbench File:Sketcher_BSplineConvertToNURB.svg, The wiki page is called "Sketcher ConvertToNURB" but the command is called "Sketcher BSplineConvertToNURB" so the page must be renamed accordingly.
- 18:2818:28, 26 September 2020 diff hist +99 N File:Sketcher BSplineConvertToNURB.svg Same as "Sketcher_BSplineApproximate.svg"; use this name to match the command's name. current
- 17:5617:56, 26 September 2020 diff hist −19 Sketcher Workbench Update icons: Sketcher_RestoreInternalAlignmentGeometry.svg, Sketcher_DeleteAllGeometry.svg, Sketcher_DeleteAllConstraints.svg
- 17:4817:48, 26 September 2020 diff hist +3 Sketcher DeleteAllGeometry Button template
- 17:4817:48, 26 September 2020 diff hist +36 Sketcher DeleteAllConstraints Sketch → Sketcher tools → 16px Delete All Constraints
- 17:3917:39, 26 September 2020 diff hist −5 Sketcher DeleteAllGeometry 16px
- 17:3517:35, 26 September 2020 diff hist +109 N File:Sketcher DeleteAllConstraints.svg Same as "Sketcher_Element_SelectionTypeInvalid.svg"; use this name to match the command's name.
- 17:3417:34, 26 September 2020 diff hist +109 N File:Sketcher DeleteAllGeometry.svg Same as "Sketcher_Element_SelectionTypeInvalid.svg"; use this name to match the command's name.
- 17:3217:32, 26 September 2020 diff hist +80 Sketcher RectangularArray 16px Rectangular array
- 17:2717:27, 26 September 2020 diff hist +44 Sketcher Move 16px Move
- 17:2317:23, 26 September 2020 diff hist +72 Sketcher Copy 16px Sketcher Copy
- 17:1817:18, 26 September 2020 diff hist +98 Sketcher Clone 16px Sketcher Clone
- 17:1417:14, 26 September 2020 diff hist +1 Sketcher Symmetry Button template
- 17:0317:03, 26 September 2020 diff hist +132 Sketcher SelectElementsAssociatedWithConstraints 16px Select Elements Associated With Constraints
- 17:0017:00, 26 September 2020 diff hist −17 Sketcher SelectConflictingConstraints 16px Select Conflicting Constraints
- 16:1916:19, 26 September 2020 diff hist −17 Sketcher SelectRedundantConstraints MenuCommand
- 16:1816:18, 26 September 2020 diff hist −15 Sketcher SelectHorizontalAxis MenuCommand
- 16:1616:16, 26 September 2020 diff hist −16 Sketcher SelectVerticalAxis 16px Select Vertical Axis
- 16:1016:10, 26 September 2020 diff hist −17 Sketcher SelectOrigin 16px Select origin
- 16:0516:05, 26 September 2020 diff hist +31 Sketcher SelectConstraints 16px Select constraints
- 16:0216:02, 26 September 2020 diff hist +59 Sketcher ConnectLines 16px Connect lines
- 16:0016:00, 26 September 2020 diff hist +79 Sketcher CloseShape 16px Close Shape
- 15:5315:53, 26 September 2020 diff hist −38 Sketcher SelectElementsWithDoFs Proper name Sketcher SelectElementsWithDoFs
- 06:3706:37, 26 September 2020 diff hist +61 Sketcher ToggleActiveConstraint Button template
- 06:3506:35, 26 September 2020 diff hist +70 Sketcher ToggleDrivingConstraint File:Sketcher ToggleDrivingConstraint.svg, proper name of the command
- 06:2906:29, 26 September 2020 diff hist +221 Sketcher RestoreInternalAlignmentGeometry File:Sketcher_RestoreInternalAlignmentGeometry.svg, button template
- 06:1806:18, 26 September 2020 diff hist +100 N File:Sketcher RestoreInternalAlignmentGeometry.svg Same as "Sketcher_Element_Ellipse_All.svg"; use this name to match the command's name.
- 06:0006:00, 26 September 2020 diff hist +9 Sketcher ConstrainSnellsLaw Image:Snells_law2_witheq.svg|x400px
- 05:5405:54, 26 September 2020 diff hist +91 Sketcher ConstrainAngle File:Sketcher_ConstrainAngle.svg
- 05:4905:49, 26 September 2020 diff hist +86 Sketcher ConstrainDiameter File:Sketcher_ConstrainDiameter.svg
- 05:3705:37, 26 September 2020 diff hist +23 Sketcher ConstrainRadius File:Sketcher_ConstrainRadius.svg
- 05:3605:36, 26 September 2020 diff hist +72 Sketcher ConstrainDistance Button template
- 05:2905:29, 26 September 2020 diff hist +46 Sketcher ConstrainDistanceX File:Sketcher_ConstrainDistanceX.svg
- 05:2905:29, 26 September 2020 diff hist +73 Sketcher ConstrainDistanceY File:Sketcher_ConstrainDistanceY.svg
- 05:2705:27, 26 September 2020 diff hist +32 Sketcher ConstrainDistanceX File:Sketcher_ConstrainDistanceX.svg
- 05:2405:24, 26 September 2020 diff hist 0 File:Sketcher ConstrainDistance.svg Vocx uploaded File:Sketcher ConstrainDistance.svg
- 05:2005:20, 26 September 2020 diff hist −53 File:Sketcher ConstrainDistance.svg Remove the redirect Tag: Blanking
- 05:1905:19, 26 September 2020 diff hist +21 Sketcher Workbench Sketcher_ConstrainLock.svg, Sketcher_ConstrainDistanceX.svg, Sketcher_ConstrainDistanceY.svg, Sketcher_ConstrainDistance.svg, Sketcher_ConstrainRadius.svg, Sketcher_ConstrainDiameter.svg, Sketcher_ConstrainAngle.svg, Sketcher_ConstrainSnellsLaw.svg, Sketcher_ConstrainInternalAlignment.svg, Sketcher_ToggleDrivingConstraint.svg
- 05:1605:16, 26 September 2020 diff hist +100 N File:Sketcher ConstrainInternalAlignment.svg Same as "Constraint_InternalAlignment.svg"; use this name to match the command's name. current
- 05:1305:13, 26 September 2020 diff hist +92 N File:Sketcher ConstrainSnellsLaw.svg Same as "Constraint_SnellsLaw.svg"; use this name to match the command's name.
- 05:1005:10, 26 September 2020 diff hist +96 N File:Sketcher ConstrainAngle.svg Same as "Constraint_InternalAngle.svg"; use this name to match the command's name.
- 05:0905:09, 26 September 2020 diff hist +89 N File:Sketcher ConstrainRadius.svg Same as "Constraint_Radius.svg"; use this name to match the command's name.
- 05:0405:04, 26 September 2020 diff hist +43 Sketcher ConstrainLock Button template
- 04:5504:55, 26 September 2020 diff hist +54 Sketcher ConstrainBlock Button template
- 04:5404:54, 26 September 2020 diff hist +23 Sketcher Workbench Block: it blocks an edge from moving, that is, it prevents its vertices from changing their current positions. It should be particularly useful to fix the position of B-Splines.
- 04:5004:50, 26 September 2020 diff hist +15 Sketcher ConstrainSymmetric File:Sketcher_ConstrainSymmetric.svg
- 04:4804:48, 26 September 2020 diff hist −7 Sketcher Workbench Equal