Sketcher SelectElementsWithDoFs/ru

From FreeCAD Documentation
Revision as of 14:45, 19 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский

Sketcher SelectElementsWithDoFs.svg Sketcher Select solver DoFs

Расположение в меню
Sketch → Инструменты для эскиза → Select solver DoFs
Верстаки
Sketcher
Быстрые клавиши
отсутствуют
Представлено в версии
0.18
См. также
...


Описание

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

How to use

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:
    Under-constrained sketch with X degrees of freedom
    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.