Sketcher CreatePolyline/cs: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/cs|Name=Sketcher CreatePolyline|Name/cs=Skicář Lomená čára|Workbenches=Skicář|MenuLocation=Náčrt → Skicář Konstrukce → Vy...") |
Renatorivo (talk | contribs) (Created page with "==Popis==") |
||
Line 3: | Line 3: | ||
{{GuiCommand/cs|Name=Sketcher CreatePolyline|Name/cs=Skicář Lomená čára|Workbenches=[[Sketcher Workbench/cs|Skicář]]|MenuLocation=Náčrt → Skicář Konstrukce → Vytvořit Lomenou čáru|SeeAlso=[[Sketcher Line/cs|Skicář Přímka]]}} |
{{GuiCommand/cs|Name=Sketcher CreatePolyline|Name/cs=Skicář Lomená čára|Workbenches=[[Sketcher Workbench/cs|Skicář]]|MenuLocation=Náčrt → Skicář Konstrukce → Vytvořit Lomenou čáru|SeeAlso=[[Sketcher Line/cs|Skicář Přímka]]}} |
||
== |
==Popis== |
||
This tool works like the [[Sketcher Line|Sketcher Line]] tool, but creates continuous line and arc segments connected by their vertices. When starting the tool, the mouse pointer changes to a white cross with a red polyline icon. The coordinates of the pointer are shown beside it in blue in real time. |
This tool works like the [[Sketcher Line|Sketcher Line]] tool, but creates continuous line and arc segments connected by their vertices. When starting the tool, the mouse pointer changes to a white cross with a red polyline icon. The coordinates of the pointer are shown beside it in blue in real time. |
Revision as of 22:27, 3 November 2018
Skicář Lomená čára |
Umístění Menu |
---|
Náčrt → Skicář Konstrukce → Vytvořit Lomenou čáru |
Pracovní stoly |
Skicář |
Výchozí zástupce |
Nikdo |
Představen ve verzi |
- |
Viz také |
Skicář Přímka |
Popis
This tool works like the Sketcher Line tool, but creates continuous line and arc segments connected by their vertices. When starting the tool, the mouse pointer changes to a white cross with a red polyline icon. The coordinates of the pointer are shown beside it in blue in real time.
Polyline started with a line, a tangent arc, a perpendicular arc then a tangent line
How to use
The polyline always starts with a straight line segment: click - move the mouse - click. Move the mouse again. After placing the first line segment, the Sketcher polyline tool has multiple modes that can be toggled with the M key. For example you can draw tangent or perpendicular arcs following a line or arc segment. Repeatedly pressing the M key toggles through these different modes:
- Press the M key: the new segment is a line which is perpendicular to the previous segment.
- Press the M key again: the new segment is a line which is tangential to the previous segment.
- Press the M key again: the new segment is an arc which is tangential to the previous segment.
- Press the M key again: the new segment is an arc which is perpendicular (left) to the previous segment.
- Press the M key again: the new segment is an arc which is perpendicular(right) to the previous segment.
- Press the M key again: You are again in the state where you started; the line is only connected with a coincidence to the previous segment.
- v0.18 and above While in any of the arc modes, holding down the Ctrl key (MacOS: CMD key) and moving the cursor causes the arc to snap by increments of 45 degrees, relative to the previously created polyline segment.
- Pick points on an empty area of the 3D view, or on an existing object (auto constraints must be active in TaskView).
- Pressing Esc or clicking the right mouse button before closing the polyline to a loop ends the current polyline and you can continue with a new one. Pressing Esc or clicking the right mouse button again ends the polyline function.
- Pressing Esc or clicking the right mouse button after closing the polyline to a loop ends the polyline function.