Skica Napravi Točku

From FreeCAD Documentation
Revision as of 18:58, 18 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Sketcher CreatePoint

Menu location
Sketch → Sketcher geometries → Create point
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
None

Description

The Point tool creates a point in the current sketch, which can be used for constructing geometry elements. The point is always an construction element and does not show up in the 3D-view.

Point in the sketcher

How to use

  • Click on the button Create point, to activate the function.
  • Clicking in the sketch creates a point.
  • Pressing Esc or clicking the right mouse button cancels the function.

Options

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

Limitations

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the PartDesign Point for a datum point or the Part Point instead.