Skicář Bod

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Sketcher CreatePoint and the translation is 30% complete.
Outdated translations are marked like this.

Skicář Bod

Umístění Menu
Náčrt → Skicář Konstrukce → Vytvořit bod
Pracovní stoly
Skicář
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Nikdo

Popis

Nástroj Bod vytvoří bod v aktuálním listu "Skicáře".

Point in the sketcher

Použití

  • Funkci aktivujete stisknutím tlačítka Bod.
  • Musí být stisknuto tolikrát, kolik bodů chcete vytvořit.
  • Při podržení klávesy Ctrl při kreslení zajistí zachycení bodu k nejbližšímu zachycovacímu bodu, bez ohledu na jeho vzdálenost.
  • Klávesu Esc stiskněte pokud chcete přerušit operaci a ukončit funkci.

Volby

  • By default points are created as construction geometry and therefore are not visible outside of Sketch editing mode. Use the Toggle Construction tool to change them to normal geometry.
  • A mode to snap to the grid can be set in the Sketcher Preferences. The point then snaps to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix the point to the grid. It still has two degrees of freedom and can be moved with the mouse or constrained to other locations.