Sketcher CreatePoint/cs: Difference between revisions

From FreeCAD Documentation
(Created page with "* Funkci aktivujete stisknutím tlačítka {{KEY|16px|Point|link = Sketcher_Point/cs Bod}}. * Musí být stisknuto tolikrá...")
(Updating to match new version of source page)
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<languages/>
<languages/>
{{Docnav|[[Sketcher MirrorSketch|Mirror sketch]]|[[Sketcher_CreateLine|Line by 2 point]]|[[Sketcher_Workbench|Sketcher]]|IconL=Sketcher MirrorSketch.png‎|IconC=Workbench_Sketcher.svg|IconR=Sketcher_Line.png}}

{{GuiCommand/cs|Name=Sketcher CreatePoint|Name/cs= Skicář Bod|Workbenches=[[Sketcher Workbench/cs|Skicář]]|MenuLocation=Náčrt → Skicář Konstrukce → Vytvořit bod|SeeAlso=}}
{{GuiCommand/cs|Name=Sketcher CreatePoint|Name/cs= Skicář Bod|Workbenches=[[Sketcher Workbench/cs|Skicář]]|MenuLocation=Náčrt → Skicář Konstrukce → Vytvořit bod|SeeAlso=}}


==Popis==
==Popis==


Nástroj {{KEY|[[Image:Sketcher_Point.png|16px|Point|link=Sketcher_Point]] [[Sketcher_Point/cs|Bod]]}} vytvoří bod v aktuálním listu "'''Skicáře'''".
Nástroj {{KEY|[[Image:Sketcher_Point.png|16px|Point|link=Sketcher_CreatePoint]] [[Sketcher_Point/cs|Bod]]}} vytvoří bod v aktuálním listu "'''Skicáře'''".


[[IMAGE:Sketcher_Point_fr_01.png|480px|Point in the sketcher]]
[[IMAGE:Sketcher_Point_fr_01.png|480px|Point in the sketcher]]
{{clear}}
{{clear}}
<div class="mw-translate-fuzzy">
==Použití==
==Použití==
</div>


* Funkci aktivujete stisknutím tlačítka {{KEY|[[Image: Sketcher_Point.png|16px|Point|link = Sketcher_Point/cs]] [[Sketcher_Point/cs|Bod]]}}.
* Funkci aktivujete stisknutím tlačítka {{KEY|[[Image: Sketcher_Point.png|16px|Point|link = Sketcher_Point/cs]] [[Sketcher_Point/cs|Bod]]}}.
Line 15: Line 19:
* Klávesu {{KEY|Esc}} stiskněte pokud chcete přerušit operaci a ukončit funkci.
* Klávesu {{KEY|Esc}} stiskněte pokud chcete přerušit operaci a ukončit funkci.


==Options==
==Volby==


A mode to snap to the grid can be set in the [[Sketcher_Preferences|Sketcher Preferences]]. The point snaps then to the grid, if it has less than 25% grid distance to a grid line.
A mode to snap to the grid can be set in the [[Sketcher_Preferences|Sketcher Preferences]]. The point snaps then to the grid, if it has less than 25% grid distance to a grid line.
The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.
The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.


==Limitations==
==Omezení==


The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the [[PartDesign_Point|PartDesign Point]] for a datum point or the [[Part_Point|Part Point]] instead.
The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the [[PartDesign_Point|PartDesign Point]] for a datum point or the [[Part_Point|Part Point]] instead.

{{clear}}

{{Docnav|[[Sketcher MirrorSketch|Mirror sketch]]|[[Sketcher_CreateLine|Line by 2 point]]|[[Sketcher_Workbench|Sketcher]]|IconL=Sketcher MirrorSketch.png‎|IconC=Workbench_Sketcher.svg|IconR=Sketcher_Line.png}}

{{Sketcher Tools navi}}

{{Userdocnavi}}

Revision as of 22:06, 14 February 2020

Skicář Bod

Umístění Menu
Náčrt → Skicář Konstrukce → Vytvořit bod
Pracovní stoly
Skicář
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Nikdo

Popis

Nástroj Point Bod vytvoří bod v aktuálním listu "Skicáře".

Point in the sketcher

Použití

  • Funkci aktivujete stisknutím tlačítka link = Sketcher_Point/cs Bod.
  • Musí být stisknuto tolikrát, kolik bodů chcete vytvořit.
  • Při podržení klávesy Ctrl při kreslení zajistí zachycení bodu k nejbližšímu zachycovacímu bodu, bez ohledu na jeho vzdálenost.
  • Klávesu Esc stiskněte pokud chcete přerušit operaci a ukončit funkci.

Volby

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

Omezení

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the PartDesign Point for a datum point or the Part Point instead.