Sketcher: Vincolo Simmetria

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This page is a translated version of the page Sketcher ConstrainSymmetric and the translation is 18% complete.

Outdated translations are marked like this.

Other languages:

Uguale lunghezza

Fissa

Sketcher

Posizione nel menu
Simmetria
Schizzo → Vincoli → Simmetria
Ambiente
Schizzo
Avvio veloce
S
Introdotto nella versione
-
Vedere anche
Parallela

Descrizione

Il vincolo Simmetria forza due punti selezionati ad essere simmetrici rispetto ad una data linea. Entrambi i punti selezionati sono vincolati a giacere sulla normale alla linea di simmetria attraverso gli stessi due punti e sono vincolati equidistanti dalla linea.

Utilizzo

Continue mode

Make sure there is no selection.
There are several ways to invoke the tool:
- Press the Constrain symmetric button.
- Select the Sketch → Sketcher constraints → Constrain symmetric option from the menu.
- introduced in version 1.0: Right-click in the 3D view and select the Constrain → Constrain symmetric option from the context menu.
- Use the keyboard shortcut: S.
The cursor changes to a cross with the tool icon.
Do one of the following:
- Select two points and a symmetry point (in that order).
- Select two points and a symmetry line (idem).
- Select a point, a symmetry line and another point (idem).
- Select a line and a symmetry point (idem).
A constraint is added.
Optionally keep creating constraints.
To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Run-once mode

Do one of the following:
- Select two points and a symmetry point (in that order).
- Select two points and a symmetry line (in any order).
- Select a line and a symmetry point (idem).
Invoke the tool as explained above, or with the following additional option:
- introduced in version 1.0: Right-click in the 3D view and select the Constrain symmetric option from the context menu.
A constraint is added.

Scripting

Two points and a symmetry line:

Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line1, PointOfLine1, Line2, PointOfLine2, SymmetryLine))

Two points and a symmetry point:

Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line1, PointOfLine1, Line2, PointOfLine2, LineS, PointOfLineS))

A line and a symmetry point (In the GUI one can select a line and a point, but it uses internally the same form as above, with the two extremities of the same line):

Sketch.addConstraint(Sketcher.Constraint('Symmetric', Line, 1, Line, 2, LineS, PointOfLineS))

The Sketcher scripting page explains the values which can be used for Line1, Line2, LineS, Line, PointOfLine1, PointOfLine2 and PointOfLineS, and contains further examples on how to create constraints from Python scripts.