Sketcher "Ограничение расстояния по горизонтали"

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Sketcher ConstrainDistanceX and the translation is 50% complete.
Outdated translations are marked like this.

Ограничение расстояния по горизонтали

Системное название
Sketcher_ConstrainDistanceX
Расположение в меню
Sketch → Ограничения эскиза → Ограничение расстояния по горизонтали
Верстаки
Sketcher
Быстрые клавиши
Shift + H
Представлено в версии
-
См. также
Ограничить расстояние, Ограничение расстояния по вертикали

Описание

Фиксирует горизонтальное расстояние между 2 точками или концами отрезка. Если выбрана только одна точка, расстояние устанавливается в точки центра координат эскиза.

Применение

  1. Pick one or two points or one line.
  2. Invoke the tool several ways:
    • Press the Constrain horizontal distance button in the toolbar.
    • Use the L keyboard shortcut.
    • Use the Sketch → Sketcher constraints → Constrain horizontal distance from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.

Программирование

Расстояние от начала координат:

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Edge, PointOfEdge, -1, 1, App.Units.Quantity('123.0 mm')))

Расстояние между двумя вершинами:

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Edge1, PointOfEdge1, Edge2, PointOfEdge2, App.Units.Quantity('123.0 mm')))

Horizontal span of line (the GUI allows selecting the edge itself, but it is just a shorthand for using the two extremities of the same line):

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Line, 1, Line, 2, App.Units.Quantity('123.0 mm')))

The Sketcher scripting page explains the values which can be used for Edge, Edge1, Edge2, PointOfEdge, PointOfEdge1, PointOfEdge2 and Line, and contains further examples on how to create constraints from Python scripts.