Sketcher ConstrainBlock

From FreeCAD Documentation
Revision as of 13:28, 19 February 2019 by Mario52 (talk | contribs) (Docnav)

Sketcher ConstrainBlock

Menu location
Sketch → Sketcher constraints → Constrain Block
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.17
See also
Constrain Lock

Description

Constrain Block blocks a geometric element in place with a single constraint. Its main intended use is to work with B-Splines which can be difficult to fully constrain otherwise.

How to use

  1. Select an element to constrain;
  2. Press the Constrain Block button.

Note: step 1 and 2 can be reversed.