Sketcher ConstrainBlock: Difference between revisions

From FreeCAD Documentation
(Created page.)
 
(Marked this version for translation)
Line 1: Line 1:
<languages/>
<languages/>
<translate>
<translate>
<!--T:1-->
{{GuiCommand
{{GuiCommand
|Name=Sketcher ConstrainBlock
|Name=Sketcher ConstrainBlock
Line 8: Line 9:
}}
}}


==Description==
==Description== <!--T:2-->


<!--T:3-->
'''Constrain Block''' blocks a geometric element in place with a single constraint. Its main intended use is to work with [[Sketcher_CreateBSpline|B-Splines]] which can be difficult to fully constrain otherwise.
'''Constrain Block''' blocks a geometric element in place with a single constraint. Its main intended use is to work with [[Sketcher_CreateBSpline|B-Splines]] which can be difficult to fully constrain otherwise.


<!--T:4-->
{{Version|0.17}}
{{Version|0.17}}


==How to use==
==How to use== <!--T:5-->


<!--T:6-->
# Select an element to constrain;
# Select an element to constrain;
# Press the {{KEY|[[File:Sketcher ConstrainBlock.png|24px]] '''Constrain Block'''}} button.
# Press the {{KEY|[[File:Sketcher ConstrainBlock.png|24px]] '''Constrain Block'''}} button.

Revision as of 04:34, 1 October 2018

Sketcher ConstrainBlock

Menu location
Sketch → Sketcher constraints → Constrain Block
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
Constrain Lock

Description

Constrain Block blocks a geometric element in place with a single constraint. Its main intended use is to work with B-Splines which can be difficult to fully constrain otherwise.

introduced in version 0.17

How to use

  1. Select an element to constrain;
  2. Press the Constrain Block button.

Note: step 1 and 2 can be reversed.