CAM ToolController

From FreeCAD Documentation
(Redirected from Path ToolController)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Other languages:

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Description

A tool controller carries properties for how a tool should be used in one or more operations.

For example a tool, like a 1/4 inch cutter can run at many different spindle speeds and feed rates. The same tool might be used in different ways in the same job.

Properties

  • feed speed (h)
  • feed speed (v)
  • rapid speed (h)
  • rapid speed (v)
  • Spindle Speed (rpm)
  • Spindle direction (forward/reverse)
  • Tool Number