Part Union

From FreeCAD Documentation
Revision as of 22:05, 13 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part Union

Menyplacering
Part → Boolean → Union
Arbetsbänkar
Part
Standard genväg
Ingen
Introducerad i version
-
Se även
Part Cut, Part Common

Beskrivning

Förenar flera valda Del objekt till ett objekt. Denna operation är helt parametrisk, så de ingående delarna ken förändras och resultatet beräknas om.

Note: This command is an automated form of the Boolean operation.

Usage

  1. Select two or more shapes
  2. Invoke the Part Union command several ways:
    • Press the Part Union button in the Part toolbar
    • Use the Part → Boolean → Union entry in the Part menu

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.

  • Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
  • Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
  • Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Items can be added and removed from the fusion, by dragging them in or out of the fusion feature in the tree view with the mouse. A manual recompute (press F5 key or click on the Refresh/Recompute icon) is required to see the results.

After this operation is complete, it may be necessary to clean up the shape with RefineShape.