Part: Cut

From FreeCAD Documentation
Revision as of 19:53, 22 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Part Cut

Menu location
Part → Cut
Workbenches
Part, Complete
Default shortcut
None
Introduced in version
-
See also
Part Union, Part Common

Descriere

Se taie (scade) obiecte parțiale selectate, ultima fiind scăzută din prima. Această operație este complet parametrică, iar componentele pot fi modificate, iar rezultatul este recalculat.

Cuts (subtracts) selected Part objects, the last one being subtracted from the first one. This operation is fully parametric and the components can be modified and the result recomputed.

Note: This command is an automated form of the Boolean operation.

Cut
Cut
Part Cut
Part Cut

Cum se utilizează

  1. Select two shapes
  2. Press the Part Cut button.
  1. Select two shapes
  2. Invoke the Part Cut command several ways:
    • Press the Cut button in the Part toolbar
    • Use the Part → Boolean → Cut entry from the Part menu

Intrări suportate

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.