Díl Oddělit

From FreeCAD Documentation
Revision as of 21:48, 13 February 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Díl Oddělit

Umístění Menu
Díl → Oddělit
Pracovní stoly
Díl, Kompletace
Výchozí zástupce
Nikdo
Představen ve verzi
-
Viz také
Díl Sjednotit, Díl Společné

Usekává (odděluje) vybrané objekty Díl tak, že později vybraný díl vyjme z dříve vybraného dílu. Tato operace je plně parametrická a komponenty mohou být upravovány a výsledek přepočítáván.

Cuts (subtracts) selected Part objects, the last one being subtracted from the first one. This operation is fully parametric and the components can be modified and the result recomputed.

Note: This command is an automated form of the Boolean operation.

Cut
Cut

Usage

  1. Select two shapes
  2. Invoke the Part Cut command several ways:
    • Press the Cut button in the Part toolbar
    • Use the Part → Boolean → Cut entry from the Part menu

Supported inputs

Input objects must be OpenCascade shapes. Examples: stuff made with Part, PartDesign, Sketcher workbenches. Not meshes (unless those were converted to shapes) - for meshes, there are specific Boolean tools in MeshDesign workbench.