OpenSCAD Workbench/cs: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<languages/>
<languages/>
{{Docnav
The OpenSCAD module is in an early stage of development.
|[[Mesh Module|Mesh Module]]
|[[Part Module|Part Module]]
|IconL=Workbench_Mesh.svg
|IconR=Workbench_Part.svg
}}


[[Image:Workbench_OpenSCAD.svg|240px|center]]
The OpenSCAD module offers interoperability with the open source software [http://www.openscad.org/ OpenSCAD].
{{Caption|align=center|The FreeCAD OpenSCAD Workbench Icon}}


== Introduction ==


The [[Image:Workbench_OpenSCAD.svg|24px]] [[OpenSCAD Workbench]] is intended to offer interoperability with the open source software [http://www.openscad.org/ OpenSCAD]. This program is not distributed as part of FreeCAD, but should be installed to make full use of this workbench.
[[Image:OpenSCADexamaple1.png|An example of imported OpenSCAD geometry]]


It contains an [[OpenSCAD_CSG|importer]] which allows you to open the [[OpenSCAD_CSG|.csg]] output from OpenSCAD in FreeCAD.
It contains a [[OpenSCAD_CSG|CSG]] importer to open the CSG files from OpenSCAD, and an exporter to output a CSG based tree. Geometry which is not based on CSG operations will be exported as a mesh.


This workbench contains functions to modify the CSG feature tree and repair models. It also contains general purpose tools that do not require installation of OpenSCAD; they can be used in conjunction with other workbenches. For example, the [[Mesh_Workbench|Mesh Workbench]] internally uses the OpenSCAD functions to perform operations with [[mesh|meshes]], as they are quite robust.
The [[OpenSCAD_CSG|exporter]] outputs a CSG based (sub-)tree to [[OpenSCAD_CSG|.csg]]. Geometry which is not based on CSG operations and is exported as a mesh.

The OpenSCAD module contains a toolbox with functions to modify the feature tree and repair models.
{{TOCright}}
[[Image:OpenSCADexamaple1.png]]

== Dependencies ==

In FreeCAD 0.19, the Ply (Python-Lex-Yacc) module, which is used to import CSG files, was removed from the FreeCAD source code, as it is a third party library not developed by FreeCAD. As a result, you now need to install Ply before using the OpenSCAD Workbench. When using a pre-packaged, stable version of FreeCAD this dependency should be installed automatically in all platforms; in other cases, for example, when [[Compiling|compiling]] from source, you may have to install it from an online repository.

In Debian/Ubuntu based systems this is done like this.
{{Code|code=
sudo apt install python3-ply
}}

The general installation in all platforms can be done from the Python package index.
{{Code|code=
pip3 install --user ply
}}


== OpenSCAD language and file format ==
== OpenSCAD language and file format ==
The OpenSCAD language allows the use of variables and loops. It allows you to specify submodules to reuse geometry and code. This high degree of flexibility makes parsing very complex. Currently the OpenSCAD module in FreeCAD can not handle the OpenSCAD language natively.
Instead, if OpenSCAD is installed, it can be used to convert the input to an output format named 'CSG'. It is a subset of the OpenSCAD Language and can be used as the input to OpenSCAD for further processing.
During conversion all parametric behavior is lost - all variable names are discarded, loops expanded and mathematical expressions evaluated.


The OpenSCAD language allows the use of variables and loops. It allows you to specify sub-modules to reuse geometry and code. This high degree of flexibility makes parsing very complex. Currently the OpenSCAD Workbench cannot handle the OpenSCAD language natively.
== GUI Commands ==
Instead, if OpenSCAD is installed, it can be used to convert the input to the CSG format, which is a subset of the OpenSCAD language, and can be used as the input to OpenSCAD for further processing.
{{OpenSCAD Tools}}
During conversion all parametric behavior is lost, meaning that all variable names are discarded, loops expanded, and mathematical expressions evaluated.

<div class="mw-translate-fuzzy">
== Tools ==
* [[Image:OpenSCAD_ColorCodeShape.png|32px]] [[OpenSCAD_ColorCodeShape|Color Code Shape]]: Change the color of selected or all shapes based on their validity.
* [[Image:OpenSCAD_ReplaceObject.png|32px]] [[OpenSCAD_ReplaceObject|Replace Object]]: Replace an object in the feature tree.
* [[Image:OpenSCAD_RemoveSubtree.png|32px]] [[OpenSCAD_RemoveSubtree|Remove Subtree]]: Removes the selected objects and all children that are not referenced from other objects.
* [[Image:OpenSCAD_RefineShapeFeature.png|32px]] [[OpenSCAD_RefineShapeFeature|Refine Shape Feature]]: Create Refine Shape Feature.
* [[Image:OpenSCAD_IncreaseTolerance.png|32px]] [[OpenSCAD_IncreaseTolerance|Increase Tolerance Feature]]: Increases tolerance of edges/faces/vertex of selected object(s).
* [[Image:OpenSCAD_Edgestofaces.png|32px]] [[OpenSCAD_Edgestofaces|Convert Edges To Faces]]: Convert edges to faces. Useful to prepare imported DXF geometry for extrusion.
* [[Image:OpenSCAD_ExpandPlacements.png|32px]] [[OpenSCAD_ExpandPlacements|Expand Placements]]: Expand all placements downwards the FeatureTree.
* [[Image:OpenSCAD_ExplodeGroup.png|32px]] [[OpenSCAD_ExplodeGroup|Explode Group]]: Explodes fused part primitives.
* [[Image:OpenSCAD_AddOpenSCADElement.png|32px]] [[OpenSCAD_AddOpenSCADElement|Add OpenSCAD Element]]: Add an OpenSCAD element by entering OpenSCAD code into the task panel.
* [[Image:OpenSCAD_MeshBoolean.png|32px]] [[OpenSCAD_MeshBoolean|Mesh Boolean]]: Creates new mesh object by boolean operation from shapes.
* [[Image:OpenSCAD_Hull.png|32px]] [[OpenSCAD_Hull|Hull]]: Apllies a hull to selected shapes.
* [[Image:OpenSCAD_Minkowski.png|32px]] [[OpenSCAD_Minkowski|Minkowski]]: Applies a minkowski sum to selected shapes.
</div>

* [[Image:OpenSCAD_ColorCodeShape.png|32px]] [[OpenSCAD_ColorCodeShape|Color Code Shape]]: Change the color of selected or all shapes based on their validity.
* [[Image:OpenSCAD_ReplaceObject.png|32px]] [[OpenSCAD_ReplaceObject|Replace Object]]: Replace an object in the feature tree.
* [[Image:OpenSCAD_RemoveSubtree.png|32px]] [[OpenSCAD_RemoveSubtree|Remove Subtree]]: Removes the selected objects and all children that are not referenced from other objects.
* [[Image:OpenSCAD_RefineShapeFeature.png|32px]] [[OpenSCAD_RefineShapeFeature|Refine Shape Feature]]: Create Refine Shape Feature.
* [[Image:OpenSCAD_IncreaseTolerance.png|32px]] [[OpenSCAD_IncreaseTolerance|Increase Tolerance Feature]]: Increases tolerance of edges/faces/vertex of selected object(s).
* [[Image:OpenSCAD_Edgestofaces.png|32px]] [[OpenSCAD_Edgestofaces|Convert Edges To Faces]]: Convert edges to faces. Useful to prepare imported DXF geometry for extrusion.
* [[Image:OpenSCAD_ExpandPlacements.png|32px]] [[OpenSCAD_ExpandPlacements|Expand Placements]]: Expand all placements downwards the FeatureTree.
* [[Image:OpenSCAD_ExplodeGroup.png|32px]] [[OpenSCAD_ExplodeGroup|Explode Group]]: Explodes fused part primitives.
* [[Image:OpenSCAD_AddOpenSCADElement.png|32px]] [[OpenSCAD_AddOpenSCADElement|Add OpenSCAD Element]]: Add an OpenSCAD element by entering OpenSCAD code into the task panel.
* [[Image:OpenSCAD_MeshBoolean.png|32px]] [[OpenSCAD_MeshBoolean|Mesh Boolean]]: Creates new mesh object by boolean operation from shapes.
* [[Image:OpenSCAD_Hull.png|32px]] [[OpenSCAD_Hull|Hull]]: Applies a hull to selected shapes.
* [[Image:OpenSCAD_Minkowski.png|32px]] [[OpenSCAD_Minkowski|Minkowski]]: Applies a minkowski sum to selected shapes.

== Preferences ==

* [[Image:Std_DlgParameter.svg|32px]] [[OpenSCAD_Preferences|Preferences]]: preferences available for the OpenSCAD tools.


== Limitations ==
== Limitations ==
OpenSCAD creates constructive solid geometry as well as importing mesh files and extruding 2d geometry (from dxf files). FreeCAD allows you to create CSG with primitives as well. The FreeCAD geometry kernel (OCCT) works using a boundary representation.
OpenSCAD creates constructive solid geometry, as well as imports mesh files and extrudes 2D geometry from [[DXF|DXF]] files. FreeCAD allows you to create CSG with primitives as well. The FreeCAD geometry kernel (OCCT) works using a boundary representation.
Therefore conversion from CSG to BREP should, in theory, be possible whereas conversion from BREP to CSG is, in general, not.
Therefore conversion from CSG to BREP should, in theory, be possible whereas conversion from BREP to CSG is, in general, not.


Line 27: Line 81:


== Hints ==
== Hints ==
When importing DXF set the Draft precision to a sensible amount as this will affect the detection of connected edges.
When importing [[DXF|DXF]] set the Draft precision to a sensible amount as this will affect the detection of connected edges.


If FreeCAD crashes when importing CSG, it is strongly recommended that you enable 'automatically check model after boolean operation' in Menu → Edit → Preferences → Part Design → Model setting
If FreeCAD crashes when importing CSG, it is strongly recommended that you enable "automatically check model after boolean operation" in {{MenuCommand|Menu → Edit → Preferences → Part Design → Model setting}}.


== Tutorials ==
== Tutorials ==
Line 38: Line 92:
* [http://www.thingiverse.com/tag:openscad Things tagged with "OpenSCAD" on Thingiverse]
* [http://www.thingiverse.com/tag:openscad Things tagged with "OpenSCAD" on Thingiverse]


{{Docnav
{{docnav|Mesh Module|Part Module}}
|[[Mesh Module|Mesh Module]]
|[[Part Module|Part Module]]
|IconL=Workbench_Mesh.svg
|IconR=Workbench_Part.svg
}}



{{OpenSCAD Tools navi{{#translation:}}}}

{{Userdocnavi{{#translation:}}}}


[[Category:User Documentation/cs]]
[[Category:Workbenches{{#translation:}}]]

Revision as of 06:21, 20 February 2020

The FreeCAD OpenSCAD Workbench Icon

Introduction

The OpenSCAD Workbench is intended to offer interoperability with the open source software OpenSCAD. This program is not distributed as part of FreeCAD, but should be installed to make full use of this workbench.

It contains a CSG importer to open the CSG files from OpenSCAD, and an exporter to output a CSG based tree. Geometry which is not based on CSG operations will be exported as a mesh.

This workbench contains functions to modify the CSG feature tree and repair models. It also contains general purpose tools that do not require installation of OpenSCAD; they can be used in conjunction with other workbenches. For example, the Mesh Workbench internally uses the OpenSCAD functions to perform operations with meshes, as they are quite robust.

Dependencies

In FreeCAD 0.19, the Ply (Python-Lex-Yacc) module, which is used to import CSG files, was removed from the FreeCAD source code, as it is a third party library not developed by FreeCAD. As a result, you now need to install Ply before using the OpenSCAD Workbench. When using a pre-packaged, stable version of FreeCAD this dependency should be installed automatically in all platforms; in other cases, for example, when compiling from source, you may have to install it from an online repository.

In Debian/Ubuntu based systems this is done like this.

sudo apt install python3-ply

The general installation in all platforms can be done from the Python package index.

pip3 install --user ply

OpenSCAD language and file format

The OpenSCAD language allows the use of variables and loops. It allows you to specify sub-modules to reuse geometry and code. This high degree of flexibility makes parsing very complex. Currently the OpenSCAD Workbench cannot handle the OpenSCAD language natively. Instead, if OpenSCAD is installed, it can be used to convert the input to the CSG format, which is a subset of the OpenSCAD language, and can be used as the input to OpenSCAD for further processing. During conversion all parametric behavior is lost, meaning that all variable names are discarded, loops expanded, and mathematical expressions evaluated.

Tools

Preferences

  • Preferences: preferences available for the OpenSCAD tools.

Limitations

OpenSCAD creates constructive solid geometry, as well as imports mesh files and extrudes 2D geometry from DXF files. FreeCAD allows you to create CSG with primitives as well. The FreeCAD geometry kernel (OCCT) works using a boundary representation. Therefore conversion from CSG to BREP should, in theory, be possible whereas conversion from BREP to CSG is, in general, not.

OpenSCAD works internally on meshes. Some operations which are useful on meshes are not meaningful on a BREP model and can not be fully supported. Among these are convex hull, minkowski sum, glide and subdiv. Currently we run the OpenSCAD binary in order to perform hull and minkwoski operations and import the result. This means that the involved geometry will be triangulated. In OpenSCAD non-uniform scaling is often used, which does not impose any problems when using meshes. In our geometry kernel geometric primitives (lines, circular sections, etc) are converted to BSpline prior to performing such deformations. Those BSplines are known to cause trouble in later boolean operations. An automatic solution is not available at the moment. Please feel free to post to the forum if you encounter such problems. Often such problems can be solved be remodeling small parts. A deformation of a cylinder can substituted by an extrusion of an ellipses.

Hints

When importing DXF set the Draft precision to a sensible amount as this will affect the detection of connected edges.

If FreeCAD crashes when importing CSG, it is strongly recommended that you enable "automatically check model after boolean operation" in Menu → Edit → Preferences → Part Design → Model setting.

Tutorials

Links