Mouse navigation: Difference between revisions

From FreeCAD Documentation
m (Undo revision 8585 by Allenbai (Talk))
No edit summary
Line 1: Line 1:
The '''mouse model''' of FreeCAD is very flexible and intuitive and with a few hints you can use it after only a minute of practice.
The '''mouse model''' of FreeCAD is very flexible and intuitive and with a few hints you can use it after only a minute of practice.


{|
[[Image:Mouse-model.png]]
!align=center|Select||Pan||Zoom||Rotate View

|-
|[[Image:Select-mouse.svg|Alt=Mouse with left button clicked | to Select ]]
|[[Image:Pan-mouse.svg |Alt=Mouse with middle button (scroll wheel) clicked | to Pan]]
|[[Image:Zoom-mouse.svg |Alt=Mouse with scroll wheel rolling up or down | to Zoom in or out]]
|[[Image:Rotate-mouse.svg|Alt=Mouse with middle button (scroll wheel) clicked first and held, and the left button clicked second. | to Rotate view]]
|}
== Selecting objects ==
== Selecting objects ==
Objects can be selected by a click with the left mouse button either by clicking on the object in the 3D-view or by selecting it in the tree view. There is also a [[Preselection]] mechanism that highlights objects and displays information about them before selection just by hovering the mouse over it. If you don't like that behaviour or you have a slow machine, you can switch preselection off in the preferences.
Objects can be selected by a click with the left mouse button either by clicking on the object in the 3D-view or by selecting it in the tree view. There is also a [[Preselection]] mechanism that highlights objects and displays information about them before selection just by hovering the mouse over it. If you don't like that behaviour or you have a slow machine, you can switch preselection off in the preferences.

Revision as of 23:31, 3 December 2011

The mouse model of FreeCAD is very flexible and intuitive and with a few hints you can use it after only a minute of practice.

Select Pan Zoom Rotate View
to Select to Pan to Zoom in or out to Rotate view

Selecting objects

Objects can be selected by a click with the left mouse button either by clicking on the object in the 3D-view or by selecting it in the tree view. There is also a Preselection mechanism that highlights objects and displays information about them before selection just by hovering the mouse over it. If you don't like that behaviour or you have a slow machine, you can switch preselection off in the preferences.

Handling Objects

The object handling is common to all workbenches. The following mouse gestures can be used to control the object position and view.

Select
Press the left mouse button over an object you want to select.
Zoom
Use the + or - keys or the mouse wheel to zoom in and out.
Pan
Click the middle mouse button and move the object around.
Rotate
Click first with the middle mouse button, hold it and the click the left mouse button on any visible part of an object and drag it in the desired direction. This works like spinning a ball that rotates around its center. If you release the buttons before you stop your motion, the object continues spinning, if this is enabled.
Setting Center of Rotation
A double click with the middle mouse button on any part of an object sets the new center of rotation and zooms in on this point.

Manipulating Objects

FreeCAD offers manipulators that can be used to modify an object or its visual appearance. A simple example is the clipping plane wich can be activated with the View→Clipping Plane menu. After activation the clipping plane object appears and shows seven obvious manipulators as little boxes: One on each end of its three coordinate axes and one on the center of the plane normal axis. There are four more that are not as obvious: The plane itself and the thin part of the three axis objects.

Scaling
To scale the object click with the left mouse button on the box manipulators at the end of the axes and pull them back and forth. Depending on the object the manipulators work independently or synchronously.
Out of plane shifting
To shift the object along its normal vector, pull the long box on the center of an axis with the left mouse button. For the clipping plane there is only one manipulator along the normal vector.
In plane shifting
To move the center of the clipping plane, click on the plane object and pull it to the desired location.
Rotation
Clicking on the thin part of the axes puts the manipulator in rotation mode.

Hardware support

The SVN version of FreeCAD also supports a couple of 3D input devices.

Getting started
Document structure
Available translations of this page: Template:Cn Template:Se