Верстак Image

From FreeCAD Documentation
Revision as of 16:59, 24 December 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Introduction

Модуль изображений управляет различными типами графика растровых изображений, и позволяет открывать их в FreeCAD. В настоящее время модуль позволяет открывать файлы формата .bmp, .jpg, .png и .xpm в отдельном окне просмотра.

Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.

Tools

Features

  • Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Совет:
Трассировка эскизированием поверх изображения работает лучше при отрицательном смещении изображения относительно эскиза.
Вы можете установить смещение в -0,1 мм при импорте или позднее редактированием положения изображения.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.

Raytracing Module/ru
Draft Module/ru