Image Workbench/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "== Возможности ==")
No edit summary
Line 15: Line 15:
* [[Image:Image-scale.svg|32px]] [[Image_Scaling/ru|Scaling]]: масштабировать изображение, импортированное на плоскость.
* [[Image:Image-scale.svg|32px]] [[Image_Scaling/ru|Scaling]]: масштабировать изображение, импортированное на плоскость.


== Возможности ==
== Особенности ==


* Like a [[Sketcher Workbench|Sketch]], an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
* Like a [[Sketcher Workbench|Sketch]], an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.

Revision as of 15:58, 10 March 2019

Введение

Верстак Image обрабатывает различные типы растровых изображений, и позволяет открыть их в FreeCAD.

Сейчас модуль поддерживает форматы файлов BMP, JPG, PNG, и XPM.

Инструменты

  • Open: открыть изображение в новой точке зрения.
  • Import to plane: импортировать изображение на плоскость в окне трёхмерного вида.
  • Scaling: масштабировать изображение, импортированное на плоскость.

Особенности

  • Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Совет:
Трассировка эскизированием поверх изображения работает лучше при отрицательном смещении изображения относительно эскиза.
Вы можете установить смещение в -0,1 мм при импорте или позднее редактированием положения изображения.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.

Raytracing Module/ru
Draft Module/ru