Image Workbench/ru: Difference between revisions
Renatorivo (talk | contribs) No edit summary |
(Updating to match new version of source page) |
||
Line 1: | Line 1: | ||
Модуль изображений управляет различными типами [http://en.wikipedia.org/wiki/Raster_graphics растровых изображений], и позволяет открывать их в FreeCAD. В настоящее время модуль позволяет открывать файлы формата .bmp, .jpg, .png and .xpm в отдельном окне просмотра. Существует также инструмент позволяющий захватывать изображение с веб-камеры. |
Модуль изображений управляет различными типами [http://en.wikipedia.org/wiki/Raster_graphics растровых изображений], и позволяет открывать их в FreeCAD. В настоящее время модуль позволяет открывать файлы формата .bmp, .jpg, .png and .xpm в отдельном окне просмотра. Существует также инструмент позволяющий захватывать изображение с веб-камеры. |
||
The image workbenches also allow to |
The image workbenches also allow to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. [[File:Image-import.svg|32px]]. |
||
<br /> |
|||
This function is only available if you have opened a FreeCAD document. |
|||
The |
The image can be moved in 3D-space by editing the placement in the [[Property editor]]. The major use is tracing over the image, in order to generate a new part at using the image as template. |
||
The image can be scaled by editing the "XSize" and "YSize" values in the [[Property editor]]. |
|||
'''Tip:'''<br /> |
|||
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.<br /> |
|||
You can set an offset of -0,1 at import or later by editing the placement of the image. |
|||
{{docnav/ru|Draft Module/ru|Macros/ru}} |
{{docnav/ru|Draft Module/ru|Macros/ru}} |
Revision as of 03:13, 14 April 2015
Модуль изображений управляет различными типами растровых изображений, и позволяет открывать их в FreeCAD. В настоящее время модуль позволяет открывать файлы формата .bmp, .jpg, .png and .xpm в отдельном окне просмотра. Существует также инструмент позволяющий захватывать изображение с веб-камеры.
The image workbenches also allow to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. .
This function is only available if you have opened a FreeCAD document.
The image can be moved in 3D-space by editing the placement in the Property editor. The major use is tracing over the image, in order to generate a new part at using the image as template.
The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
Tip:
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 at import or later by editing the placement of the image.