Image Workbench: Difference between revisions

From FreeCAD Documentation
(→‎Tools: Proper tools)
(→‎Tools: New links, the pages must be created)
Line 13: Line 13:


<!--T:9-->
<!--T:9-->
* [[Image:Image-import.svg|32px]] [[Image_Import|Image Import]]: open an image on a new viewport.
* [[Image:Image-import.svg|32px]] [[Image_Open|Open]]: open an image on a new viewport.
* [[Image:Image-import-to-plane.svg|32px]] [[Image_Import_to_plane|Image Import to plane]]: import an image to a plane in the 3D view.
* [[Image:Image-import-to-plane.svg|32px]] [[Image_CreateImagePlane|Import to plane]]: import an image to a plane in the 3D view.
* [[Image:Image-scale.svg|32px]] [[Image_scale|Image Scaling]]: scale an image imported to a plane.
* [[Image:Image-scale.svg|32px]] [[Image_Scaling|Scaling]]: scale an image imported to a plane.


== Features == <!--T:11-->
== Features == <!--T:11-->

Revision as of 21:31, 5 December 2018

Introduction

The Image Workbench manages different types of bitmap images, and allows you to open them in FreeCAD.

Currently, the module supports opening BMP, JPG, PNG, and XPM file formats.

Tools

  • Open: open an image on a new viewport.
  • Import to plane: import an image to a plane in the 3D view.
  • Scaling: scale an image imported to a plane.

Features

  • Like a Sketch, the imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Workflow

A major use of this tool is tracing over the image, with the Draft or Sketcher Workbenches, in order to extrude the shape, and generate a new part based on the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be behind the plane were you draw the contours of the image.

The offset of the image can be set during import, or changed later in its properties.

Raytracing Module
Draft Module