FEM Solver/es: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
<languages/>
<languages/>
<div class="mw-translate-fuzzy">
== Предисловие ==
== Предисловие ==
На этой странице собрана вся информация о решающей системе FEM, используемой FreeCAD [[FEM Module | FEM Module]]. Интерфейс между решателем и FreeCAD в предварительной и последующей обработке выполняется с помощью текстовых файлов. Теоретически это означает, что любой решатель, использующий текстовые файлы, способен работать вместе с FreeCAD FEM.
На этой странице собрана вся информация о решающей системе FEM, используемой FreeCAD [[FEM Module | FEM Module]]. Интерфейс между решателем и FreeCAD в предварительной и последующей обработке выполняется с помощью текстовых файлов. Теоретически это означает, что любой решатель, использующий текстовые файлы, способен работать вместе с FreeCAD FEM.
</div>


This page collects information on the finite element solvers used by the [[FEM Workbench|FEM Workbench]]. The interface between a solver and FreeCAD in pre-processing as well as post-processing is done through text files. This means that in theory any solver which can be configured and controlled by means of text files is able to work together with FreeCAD; a proper parser and writer of input and output files needs to be programmed for this communication to work.

Wikipedia [https://en.wikipedia.org/wiki/List_of_finite_element_software_packages lists many finite element software packages]. A comparison can be found on [https://feacompare.com/ feacompare.com].

<div class="mw-translate-fuzzy">
== Versión del solucionador en varias distribuciones de Linux ==
== Versión del solucionador en varias distribuciones de Linux ==
* Ver https://github.com/luzpaz/FreeCAD-dependencies/blob/master/FC-Workbenches/FEM.md
* Ver https://github.com/luzpaz/FreeCAD-dependencies/blob/master/FC-Workbenches/FEM.md
*: <sub>(también mencionado en la publicación del foro
*: <sub>(también mencionado en la publicación del foro
https://forum.freecadweb.org/viewtopic.php?f=18&t=26326&start=10#p270325)</sub>
https://forum.freecadweb.org/viewtopic.php?f=18&t=26326&start=10#p270325)</sub>
</div>

The [https://github.com/luzpaz/FreeCAD-dependencies FreeCAD-dependencies] repository tracks the dependencies of FreeCAD across many Linux distribution. The [https://github.com/luzpaz/FreeCAD-dependencies/blob/master/FC-Workbenches/FEM.md FEM.md] page looks at available open source FEA solvers that could be used with the [[FEM Workbench|FEM Workbench]]. The page shows the version of a particular solver in the repository of a particular Linux distribution. This information is useful to know if a solver is current, or out of date and must be upgraded.

The information is also discussed in the forum: [https://forum.freecadweb.org/viewtopic.php?f=18&t=26326&start=10#p270325 supported and not supported Solver].

== Solvers with an interface in FreeCAD ==

These solvers are well integrated into FreeCAD, which means that it's possible to set up and run a simulation project from the graphical interface and buttons in the FEM Workbench.


== Solver implemented in FreeCAD FEM ==
=== CalculiX ===
=== CalculiX ===
This is the first solver that was integrated to work with the FEM Workbench. CalculiX is designed principally for static, thermo-mechanical, and modal analyses. More information about this solver is in [[FEM CalculiX|FEM CalculiX]].
* [[FEM_CalculiX]]


=== Elmer ===
=== Elmer ===

* https://forum.freecadweb.org/viewtopic.php?f=18&t=22576
The Elmer multiphysics solver was integrated into FreeCAD as a [[Google Summer of Code 2017]] project: [https://www.csc.fi/web/elmer main website], [http://www.elmerfem.org./ community portal], [https://github.com/ElmerCSC/elmerfem code repository], [https://forum.freecadweb.org/viewtopic.php?f=18&t=22576 Elmer Integration (GSoC) - Activity Log] (forum thread).
* https://www.csc.fi/web/elmer
* https://github.com/ElmerCSC/elmerfem


=== Z88 ===
=== Z88 ===
* https://en.z88.de/z88os/
* https://en.z88.de/download-z88os/
* https://github.com/LSCAD/Z88OS (source code, binary for win, lin, osx)
* Z88os V13 released 20.05.2009 https://forum.z88.de/viewtopic.php?t=90 (Version in Debian Jessie, Stretch, Buster)
* Z88os V15 released 17.07.2017 https://forum.z88.de/viewtopic.php?f=18&t=885
* https://forum.freecadweb.org/viewtopic.php?t=23318


The Z88 solver is designed for linear static simulations with an emphasis in teaching about the finite element method. It was the second solver to be [https://forum.freecadweb.org/viewtopic.php?f=18&t=15568 integrated into FreeCAD]. Afterwards, the integration was improved as a [[Google Summer of Code 2017]] project.
== Solver implemented as separate Macro or Module (Workbench) in FreeCAD ==

See the information:
* [https://en.z88.de/z88os/ Main website], [https://en.z88.de/download-z88os/ download page], [https://github.com/LSCAD/Z88OS source code repository] (and precompiled binaries).
* Release notes: [https://forum.z88.de/viewtopic.php?f=18&t=885 Z88os V15 released 17.07.2017], [https://forum.z88.de/viewtopic.php?t=90 Z88os V13 released 20.05.2009] (version in Debian Jessie 8, Stretch 9, Buster 10).
* [https://forum.freecadweb.org/viewtopic.php?t=23318 How to use Z88 in FEM?] (forum thread).

There are two versions, Z88OS is the open source edition, while Z88Aurora is freeware, and includes a graphical interface and additional solution methods.

== Solvers implemented as external workbenches ==

These solvers aren't integrated into the [[FEM Workbench|FEM Workbench]], which means they need a separate interface to set up a simulation project. This is achieved through [[macros|macros]] or [[external workbenches|external workbenches]].

=== OpenFoam ===
=== OpenFoam ===
* Initial forum topic: https://forum.freecadweb.org/viewtopic.php?f=18&t=21576
* There is an own subforum: [https://forum.freecadweb.org/viewforum.php?f=37 FEM -> CFD]


[https://openfoam.org/ OpenFoam] is a powerful framework for [https://en.wikipedia.org/wiki/Computational_fluid_dynamics computational fluid dynamics] (CFD) simulation, distributed as a series of C++ libraries.
=== Dualsphysics ===
* https://forum.freecadweb.org/viewtopic.php?f=18&t=20595


OpenFoam is available in FreeCAD through two external workbenches:
== Solver not implemented but some development is going on ==
* [https://github.com/qingfengxia/Cfd Cfd], originally by Qingfeng Xia.
=== Fenics ===
* [https://github.com/jaheyns/CfdOF CfdOF], a fork of Cfd focusing on ease of use.
* https://forum.freecadweb.org/viewtopic.php?f=18&t=4677


While Cfd is intended to be feature-complete for advanced users, CfdOF focuses on users that are just starting in the world of CFD and OpenFoam.
== Solver not implemented but of interest in any kind ==


For Cfd: [https://forum.freecadweb.org/viewtopic.php?f=18&t=13699 update on FreeCAD + OpenFOAM fluid dynamic computation] (forum thread), [https://forum.freecadweb.org/viewtopic.php?f=37&t=22993 Progress of the general Computational Fluid Dynamics (CFD) workbench: CfdWorkbench] (old thread).
=== List on Wikipedia ===
* https://en.wikipedia.org/wiki/List_of_finite_element_software_packages


For CfdOF: [https://forum.freecadweb.org/viewtopic.php?f=18&t=21576 Computational Fluid Dynamics (CFD) workbench using OpenFOAM] (forum thread), [http://opensim.co.za/training.html training material].
=== Agros2D ===
* http://www.hpfem.org/hermes/
* http://www.agros2d.org/


Both workbenches can be installed through the [[AddonManager|AddonManager]], and both have a place for discussion in the [https://forum.freecadweb.org/viewforum.php?f=37 CfdOF / CFD subforum].
=== Code Aster ===
* https://forum.freecadweb.org/viewtopic.php?t=2839
* https://www.code-aster.org/


=== Felt ===
=== DualSPHysics ===
* https://forum.freecadweb.org/viewtopic.php?f=18&t=17061&start=20#p268503
* http://felt.sourceforge.net/
* https://github.com/Sudhanshu-Dubey14/felt


[https://dual.sphysics.org/ DualSPHysics] is a set of C++, CUDA, and Java libraries that use the [https://en.wikipedia.org/wiki/Smoothed-particle_hydrodynamics smoothed particle hydrodynamics] (SPH) model named [https://wiki.manchester.ac.uk/sphysics/index.php/Main_Page SPHysics] to study free-surface flow phenomena such as crashing waves.
=== Frame3dd ===

* http://frame3dd.sourceforge.net/
DesignSPHysics is an external workbench built into FreeCAD that provides a graphical user interface for DualSPHysics: [https://design.sphysics.org/ main website], [https://github.com/dualsphysics/DesignSPHysics code repository], [https://forum.freecadweb.org/viewtopic.php?f=18&t=20595 Interesting project: DesignSPHysics fluid simulator] (forum thread).
* https://forum.freecadweb.org/viewtopic.php?f=24&t=19428

* https://github.com/pslack/frame3dd
DesignSPHysics can be installed through the [[AddonManager|AddonManager]].

=== FastHenry and FasterCap ===

FastHenry and FasterCap are inductance-resistance and capacitance field solvers developed by FastFieldSolvers: [https://www.fastfieldsolvers.com/default.asp main website], [https://www.fastfieldsolvers.com/download.htm download page] (binary and source code), [https://www.fastfieldsolvers.com/forum/ forum].

The [[EM Workbench|EM Workbench]] is an external workbench that was created to serve as the front-end for these electromagnetic solvers. FastHenry, for 3D magneto-quasistatic impedance analysis, is fully supported, while FasterCap is accessible through some Python macros.

See: [https://forum.freecadweb.org/viewtopic.php?f=9&t=33372 ElectroMagnetic Workbench] (main thread), [https://forum.freecadweb.org/viewtopic.php?f=18&t=31920 Electromagnetic Workbench - again..], [https://forum.freecadweb.org/viewtopic.php?f=18&t=5400 FreeCAD for ElectroMagnetics], [https://github.com/ediloren/EM-Workbench-for-FreeCAD code repository] for the workbench.

The EM Workbench can be installed through the [[AddonManager|AddonManager]].

=== fcFEM ===

fcFEM is a finite element solver for structural and mechanical studies, implemented in Python, and which can be run directly from FreeCAD without calling external binary solvers. Therefore, it can be considered FreeCAD's own internal solver.

fcFEM was designed to overcome certain limitations from other solvers, such as CalculiX, in order to perform various structural engineering studies.

Some of the problems that are intended to be overcome by this solver include
* Mixed mesh analyses (solid-shell) for dealing with composite columns or prefabricated architectural components: [https://forum.freecadweb.org/viewtopic.php?f=18&t=21029&p=216682&hilit=sandwich#p216682 FEM object types].
* Improved beam and shell elements, as CalculiX's beam elements seem to give wrong results: [https://forum.freecadweb.org/viewtopic.php?f=18&t=27903&hilit=beam#p226038 CalculiX 3-node Beam Element], [https://forum.freecadweb.org/viewtopic.php?f=18&t=21029&start=100 FEM object types], [https://forum.freecadweb.org/viewtopic.php?f=18&t=16044 Example for 1D analysis].
* Arc-length control for overcoming limit points for elastic-plastic collapse analysis: [https://forum.freecadweb.org/viewtopic.php?f=24&t=26921&hilit=riks#p215325 FEM - Tubular Connection with Shell Elements].
* Zero-thickness interface elements for various applications, like post-tensioned concrete with friction: [https://forum.freecadweb.org/viewtopic.php?f=18&t=30286&hilit=classical&start=20#p259636 pre-stressed pre/post-tensioned concrete bridge].

The author considers FreeCAD a good prototyping platform to quickly set up, test, and visualize different structural problems, so having an integrated yet flexible solver is very helpful. See the main thread, [https://forum.freecadweb.org/viewtopic.php?f=18&t=33974 fcFEM - FEA from start to finish].

fcFEM is packaged as a python library and a macro, and can be downloaded from the [https://github.com/HarryvL/fcFEM github repository]. It will eventually be available from the [[AddonManager|AddonManager]], or will be distributed as part of FreeCAD itself.

== Implementation in progress ==
=== FEniCS ===

FEniCS is a computing framework for solving partial differential equations (PDEs), with high-level programming interfaces in Python and C++. It can be used to establish scientific problems in finite element formulations that then can be solved numerically.

See: [https://fenicsproject.org/ main website], [https://forum.freecadweb.org/viewtopic.php?f=18&t=4677 Fenics as Solver] (forum thread).

[https://github.com/qingfengxia/FenicsSolver FenicsSolver] is a simulation platform to deal with multi-body, multi-physics (coupled), multi-scale problems. It hopes to integrate the FEniCS solver into both the [[FEM Workbench|FEM Workbench]] and the Cfd [[external workbenches|external workbench]], so the resulting system functions like a free alternative to Comsol or Moose. FenicsSolver is being developed by the same author of Cfd.

=== OOFEM ===
[http://www.oofem.org/ OOFEM] is an object oriented FEM program by the Czech Technical University, for solving mechanical, transport and fluid mechanics problems.

It was mentioned as having some advantages over CalculiX, like interface elements ([https://forum.freecadweb.org/viewtopic.php?f=18&t=30286&start=20#p260275 pre-stressed pre/post-tensioned concrete bridge]), and arc-length control for elastic-plastic collapse analysis ([https://forum.freecadweb.org/viewtopic.php?f=24&t=26921&hilit=Arc#p215325 FEM - Tubular Connection with Shell Elements]).

Preliminary integration into the FEM Workbench has been done. See: [https://forum.freecadweb.org/viewtopic.php?f=18&t=31288 OOFem] (main thread), [https://forum.freecadweb.org/viewtopic.php?t=15568&start=20#p126338 test request, multiple solvers].

Until the solver integration is completed and the new code is merged into the main FreeCAD repository, the required files for using the solver in the FEM Workbench can be downloaded from a [https://github.com/berndhahnebach/FreeCAD_bhb/tree/femoofem/src/Mod/Fem/ forked FreeCAD branch]. For a implementation overview have a look at the very clean commit history https://github.com/berndhahnebach/FreeCAD_bhb/commits/femoofem

=== MBDyn ===
* OpenSource general purpose Multibody Dynamics analysis software
* https://www.mbdyn.org/
* https://forum.freecadweb.org/viewtopic.php?f=18&t=39165

== Solvers not integrated ==

The following solvers have not been integrated into FreeCAD but they have garnered some interest by the user community. If a developer wishes to create a communication bridge for a particular solver, he or she should refer to the [https://forum.freecadweb.org/viewforum.php?f=18 FEM subforum] for advice and assistance.

The following articles may be outdated, but the information they contain may still be useful to understand how to integrate solvers into FreeCAD
* [[Extend FEM Module|Extend FEM Module]]
* [[Add FEM Equation Tutorial|Add FEM Equation Tutorial]]
* [[Add FEM Constraint Tutorial|Add FEM Constraint Tutorial]]

=== Agros2D and Hermes ===
[http://www.agros2d.org/ Agros2D] is a multiplatform graphical program designed for solving different physical problems. Internally it uses the [http://www.hpfem.org/hermes/ Hermes] C++ libraries for the solution of simple and complex time-dependent nonlinear partial differential equation (PDE) systems using a general version of the finite element method [https://en.wikipedia.org/wiki/Hp-FEM (hp-FEM)]. Main code [https://github.com/hpfem/hermes repository], and [https://github.com/hpfem/hermes-tutorial tutorials].

=== Code-Aster and Code-Saturne ===
[https://www.code-aster.org/ Code-Aster] is an open source multiphysics solver; together with the Salomé-Meca pre-processor they form a simulation platform developed by EDF-GDF, France's biggest energy company. It was an early package considered for inclusion in FreeCAD: [https://forum.freecadweb.org/viewtopic.php?t=2839 FreeCAD and Code-Aster/Salome-Meca] (forum thread).

[https://www.code-saturne.org/cms/ Code-Saturne] is a free, open-source software developed and released by EDF to solve computational fluid dynamics (CFD).

=== FElt ===
[http://felt.sourceforge.net/ FElt] is a finite element package to solve linear static and dynamic structural analysis problems. The [https://sourceforge.net/projects/felt/ original code] is outdated, so it was forked to a [https://github.com/Sudhanshu-Dubey14/felt new repository] to revive the project and make it compile in a modern system.

It was suggested in the forums to perform reinforced concrete frames analysis (beam and column assemblies) using 1D beam elements: [https://forum.freecadweb.org/viewtopic.php?f=18&t=17061&start=20#p268503 Automation in Design], [https://forum.freecadweb.org/viewtopic.php?f=18&t=33463 Felt in FEM Workbench].

=== Frame3DD ===

[http://frame3dd.sourceforge.net/ Frame3DD] is a software package for static and dynamic structural analysis of 2D and 3D frames and trusses, [https://github.com/pslack/frame3dd main repository]. A preliminary reader for input files was announced in the forums:
[https://forum.freecadweb.org/viewtopic.php?f=24&t=19428 Test read data from Frame3DD file.] General forum topic in FEM
https://forum.freecadweb.org/viewtopic.php?f=18&t=43389 .


=== Impact FEM ===
=== Impact FEM ===
* http://www.impact-fem.org/
* http://www.impact-fem.org/ (broken link)

=== libMesh ===
[https://libmesh.github.io/ libMesh] is a c++ finite element library for the numerical solution of partial differential equations, with a major goal to provide support for adaptive mesh refinement (AMR) computations in parallel: [https://github.com/libMesh/libmesh code repository].

It was suggested to integrate this library into FreeCAD as part of a [[Google Summer of Code]] [https://forum.freecadweb.org/viewtopic.php?f=8&t=35493 project].


=== Modelica ===
=== Modelica ===
[https://www.modelica.org/ Modelica] is a language to model and optimize complex, and interconnected physical systems, for example, mechanical, electrical, thermal, hydraulic, and others. The language itself and its standard libraries are open source. Some simulation environments based on Modelica, like Catia's Dymola, are proprietary, but there are also free implementations like [https://openmodelica.org/ OpenModelica] and [https://jmodelica.org/ JModelica].
* https://www.modelica.org/

* https://forum.freecadweb.org/viewtopic.php?f=18&t=32556
* Python: https://forum.freecadweb.org/viewtopic.php?f=18&t=32556#p272632
With FreeCAD, Modelica was suggested to help perform animations, but more broadly it could be used in mechanical and building engineering to solve equations and optimize a particular design: [https://forum.freecadweb.org/viewtopic.php?f=18&t=32556 Modelica] (forum thread).

The [https://pypi.org/project/PyFMI/ PyFMI] package contains Python bindings to work with FMU models, which are standardized models in binary format produced by compliant Modelica environments, including Dymola, OpenModelica, and JModelica. It was suggested that this library could help FreeCAD connect to a [https://forum.freecadweb.org/viewtopic.php?f=18&t=32556#p272632 Modelica system] (forum post).


=== Mumps ===
=== Mumps ===
[http://mumps-solver.org/ Mumps] is a generic solver for massive systems of equations, which generally deals with factorizing and operating on sparse matrices. It was mentioned in the forum: [https://forum.freecadweb.org/viewtopic.php?t=15568&start=20#p126087 test request, multiple solvers].
* http://mumps-solver.org/

* https://forum.freecadweb.org/viewtopic.php?t=15568&start=20#p126087
It does not perform finite element analysis directly, but it may be used internally by other packages like Code-Aster.


=== Nastran ===
=== Nastran ===
Nastran is a structural analysis program developed by NASA in the 1970s. Modern versions of it are commercial products and closed source; however, older versions of it, [https://github.com/nasa/NASTRAN-93 Nastran-93] and [https://github.com/nasa/NASTRAN-95 Nastran-95] were released as open source in 2015. Forum post: [https://forum.freecadweb.org/viewtopic.php?f=18&t=12753 Nastran].
* https://forum.freecadweb.org/viewtopic.php?f=18&t=12753


There is no technical support for the open source code, and it is probably difficult to compile in a modern system.
=== OOFEM ===
* http://www.oofem.org/
* https://forum.freecadweb.org/viewtopic.php?t=15568&start=20#p126338


=== OpenSees ===
=== OpenSees ===
[http://opensees.berkeley.edu/ OpenSees] is a software framework for developing applications to simulate structural and geotechnical systems mainly in the field of earthquake engineering. Forum topics https://forum.freecadweb.org/viewtopic.php?f=18&t=20745 and https://forum.freecadweb.org/viewtopic.php?f=18&t=31922
* http://opensees.berkeley.edu/


=== PolyFEM ===
[https://polyfem.github.io/ PolyFEM] is PolyFEM is a simple C++ and Python finite element library. We provide a wide set of common PDEs including:
Laplace, Helmholtz, Linear Elasticity, Saint-Venant Elasticity, Neo-Hookean Elasticity and Stokes. Form topic https://forum.freecadweb.org/viewtopic.php?f=18&t=42857

=== Sparselizard ===
[http://www.sparselizard.org/ Sparselizard is a fast, general, multiphysics, p-adaptive, open source C++ finite element library running on Linux, Mac and Windows. It is used to design next generation microdevices (ultrasound transducers, micromirrors, microvalves, comb drives,...) and it is carefully validated against analytical solutions, third party software and measurements of the fabricated devices. AFAIS it is developed by the team of gmsh mesh generator.

=== SU2 ===

[https://su2code.github.io/ SU2] is a collection of software tools developed in C++ and Python for the solution of [https://en.wikipedia.org/wiki/Partial_differential_equation partial differential equations] (PDE) and PDE-constrained optimization problems on unstructured meshes. It is particularly used in the fields of aerodynamics and computational fluid dynamics (CFD).


=== Technog ===
=== Technog ===
Technog Professional is a closed source program to perform geotechnical simulations such as landslides, driving piles, slope stability, and civil engineering calculations (masonry and earthquake response), [http://www.feat.nl/ website] (broken link).
* Closed Source

* https://forum.freecadweb.org/viewtopic.php?f=18&t=26772
Technog was successfully used in FreeCAD as a substitute of CalculiX, although the trial version is limited in the number of elements it can handle: [https://forum.freecadweb.org/viewtopic.php?f=18&t=26772 Integration of tochnog solver in FreeCAD FEM] (forum thread).


<div class="mw-translate-fuzzy">
=== XC ===
=== XC ===
* http://www.xcengineering.xyz/
* http://www.xcengineering.xyz/
* https://forum.freecadweb.org/viewtopic.php?f=18&t=31262
* https://forum.freecadweb.org/viewtopic.php?f=18&t=31262
</div>


{{FEM Tools navi{{#translation:}}}}
[[Category:FEM]]
{{Userdocnavi{{#translation:}}}}
{{clear}}

Revision as of 21:59, 25 February 2020

Предисловие

На этой странице собрана вся информация о решающей системе FEM, используемой FreeCAD FEM Module. Интерфейс между решателем и FreeCAD в предварительной и последующей обработке выполняется с помощью текстовых файлов. Теоретически это означает, что любой решатель, использующий текстовые файлы, способен работать вместе с FreeCAD FEM.

This page collects information on the finite element solvers used by the FEM Workbench. The interface between a solver and FreeCAD in pre-processing as well as post-processing is done through text files. This means that in theory any solver which can be configured and controlled by means of text files is able to work together with FreeCAD; a proper parser and writer of input and output files needs to be programmed for this communication to work.

Wikipedia lists many finite element software packages. A comparison can be found on feacompare.com.

Versión del solucionador en varias distribuciones de Linux

https://forum.freecadweb.org/viewtopic.php?f=18&t=26326&start=10#p270325)

The FreeCAD-dependencies repository tracks the dependencies of FreeCAD across many Linux distribution. The FEM.md page looks at available open source FEA solvers that could be used with the FEM Workbench. The page shows the version of a particular solver in the repository of a particular Linux distribution. This information is useful to know if a solver is current, or out of date and must be upgraded.

The information is also discussed in the forum: supported and not supported Solver.

Solvers with an interface in FreeCAD

These solvers are well integrated into FreeCAD, which means that it's possible to set up and run a simulation project from the graphical interface and buttons in the FEM Workbench.

CalculiX

This is the first solver that was integrated to work with the FEM Workbench. CalculiX is designed principally for static, thermo-mechanical, and modal analyses. More information about this solver is in FEM CalculiX.

Elmer

The Elmer multiphysics solver was integrated into FreeCAD as a Google Summer of Code 2017 project: main website, community portal, code repository, Elmer Integration (GSoC) - Activity Log (forum thread).

Z88

The Z88 solver is designed for linear static simulations with an emphasis in teaching about the finite element method. It was the second solver to be integrated into FreeCAD. Afterwards, the integration was improved as a Google Summer of Code 2017 project.

See the information:

There are two versions, Z88OS is the open source edition, while Z88Aurora is freeware, and includes a graphical interface and additional solution methods.

Solvers implemented as external workbenches

These solvers aren't integrated into the FEM Workbench, which means they need a separate interface to set up a simulation project. This is achieved through macros or external workbenches.

OpenFoam

OpenFoam is a powerful framework for computational fluid dynamics (CFD) simulation, distributed as a series of C++ libraries.

OpenFoam is available in FreeCAD through two external workbenches:

  • Cfd, originally by Qingfeng Xia.
  • CfdOF, a fork of Cfd focusing on ease of use.

While Cfd is intended to be feature-complete for advanced users, CfdOF focuses on users that are just starting in the world of CFD and OpenFoam.

For Cfd: update on FreeCAD + OpenFOAM fluid dynamic computation (forum thread), Progress of the general Computational Fluid Dynamics (CFD) workbench: CfdWorkbench (old thread).

For CfdOF: Computational Fluid Dynamics (CFD) workbench using OpenFOAM (forum thread), training material.

Both workbenches can be installed through the AddonManager, and both have a place for discussion in the CfdOF / CFD subforum.

DualSPHysics

DualSPHysics is a set of C++, CUDA, and Java libraries that use the smoothed particle hydrodynamics (SPH) model named SPHysics to study free-surface flow phenomena such as crashing waves.

DesignSPHysics is an external workbench built into FreeCAD that provides a graphical user interface for DualSPHysics: main website, code repository, Interesting project: DesignSPHysics fluid simulator (forum thread).

DesignSPHysics can be installed through the AddonManager.

FastHenry and FasterCap

FastHenry and FasterCap are inductance-resistance and capacitance field solvers developed by FastFieldSolvers: main website, download page (binary and source code), forum.

The EM Workbench is an external workbench that was created to serve as the front-end for these electromagnetic solvers. FastHenry, for 3D magneto-quasistatic impedance analysis, is fully supported, while FasterCap is accessible through some Python macros.

See: ElectroMagnetic Workbench (main thread), Electromagnetic Workbench - again.., FreeCAD for ElectroMagnetics, code repository for the workbench.

The EM Workbench can be installed through the AddonManager.

fcFEM

fcFEM is a finite element solver for structural and mechanical studies, implemented in Python, and which can be run directly from FreeCAD without calling external binary solvers. Therefore, it can be considered FreeCAD's own internal solver.

fcFEM was designed to overcome certain limitations from other solvers, such as CalculiX, in order to perform various structural engineering studies.

Some of the problems that are intended to be overcome by this solver include

The author considers FreeCAD a good prototyping platform to quickly set up, test, and visualize different structural problems, so having an integrated yet flexible solver is very helpful. See the main thread, fcFEM - FEA from start to finish.

fcFEM is packaged as a python library and a macro, and can be downloaded from the github repository. It will eventually be available from the AddonManager, or will be distributed as part of FreeCAD itself.

Implementation in progress

FEniCS

FEniCS is a computing framework for solving partial differential equations (PDEs), with high-level programming interfaces in Python and C++. It can be used to establish scientific problems in finite element formulations that then can be solved numerically.

See: main website, Fenics as Solver (forum thread).

FenicsSolver is a simulation platform to deal with multi-body, multi-physics (coupled), multi-scale problems. It hopes to integrate the FEniCS solver into both the FEM Workbench and the Cfd external workbench, so the resulting system functions like a free alternative to Comsol or Moose. FenicsSolver is being developed by the same author of Cfd.

OOFEM

OOFEM is an object oriented FEM program by the Czech Technical University, for solving mechanical, transport and fluid mechanics problems.

It was mentioned as having some advantages over CalculiX, like interface elements (pre-stressed pre/post-tensioned concrete bridge), and arc-length control for elastic-plastic collapse analysis (FEM - Tubular Connection with Shell Elements).

Preliminary integration into the FEM Workbench has been done. See: OOFem (main thread), test request, multiple solvers.

Until the solver integration is completed and the new code is merged into the main FreeCAD repository, the required files for using the solver in the FEM Workbench can be downloaded from a forked FreeCAD branch. For a implementation overview have a look at the very clean commit history https://github.com/berndhahnebach/FreeCAD_bhb/commits/femoofem

MBDyn

Solvers not integrated

The following solvers have not been integrated into FreeCAD but they have garnered some interest by the user community. If a developer wishes to create a communication bridge for a particular solver, he or she should refer to the FEM subforum for advice and assistance.

The following articles may be outdated, but the information they contain may still be useful to understand how to integrate solvers into FreeCAD

Agros2D and Hermes

Agros2D is a multiplatform graphical program designed for solving different physical problems. Internally it uses the Hermes C++ libraries for the solution of simple and complex time-dependent nonlinear partial differential equation (PDE) systems using a general version of the finite element method (hp-FEM). Main code repository, and tutorials.

Code-Aster and Code-Saturne

Code-Aster is an open source multiphysics solver; together with the Salomé-Meca pre-processor they form a simulation platform developed by EDF-GDF, France's biggest energy company. It was an early package considered for inclusion in FreeCAD: FreeCAD and Code-Aster/Salome-Meca (forum thread).

Code-Saturne is a free, open-source software developed and released by EDF to solve computational fluid dynamics (CFD).

FElt

FElt is a finite element package to solve linear static and dynamic structural analysis problems. The original code is outdated, so it was forked to a new repository to revive the project and make it compile in a modern system.

It was suggested in the forums to perform reinforced concrete frames analysis (beam and column assemblies) using 1D beam elements: Automation in Design, Felt in FEM Workbench.

Frame3DD

Frame3DD is a software package for static and dynamic structural analysis of 2D and 3D frames and trusses, main repository. A preliminary reader for input files was announced in the forums: Test read data from Frame3DD file. General forum topic in FEM https://forum.freecadweb.org/viewtopic.php?f=18&t=43389 .

Impact FEM

libMesh

libMesh is a c++ finite element library for the numerical solution of partial differential equations, with a major goal to provide support for adaptive mesh refinement (AMR) computations in parallel: code repository.

It was suggested to integrate this library into FreeCAD as part of a Google Summer of Code project.

Modelica

Modelica is a language to model and optimize complex, and interconnected physical systems, for example, mechanical, electrical, thermal, hydraulic, and others. The language itself and its standard libraries are open source. Some simulation environments based on Modelica, like Catia's Dymola, are proprietary, but there are also free implementations like OpenModelica and JModelica.

With FreeCAD, Modelica was suggested to help perform animations, but more broadly it could be used in mechanical and building engineering to solve equations and optimize a particular design: Modelica (forum thread).

The PyFMI package contains Python bindings to work with FMU models, which are standardized models in binary format produced by compliant Modelica environments, including Dymola, OpenModelica, and JModelica. It was suggested that this library could help FreeCAD connect to a Modelica system (forum post).

Mumps

Mumps is a generic solver for massive systems of equations, which generally deals with factorizing and operating on sparse matrices. It was mentioned in the forum: test request, multiple solvers.

It does not perform finite element analysis directly, but it may be used internally by other packages like Code-Aster.

Nastran

Nastran is a structural analysis program developed by NASA in the 1970s. Modern versions of it are commercial products and closed source; however, older versions of it, Nastran-93 and Nastran-95 were released as open source in 2015. Forum post: Nastran.

There is no technical support for the open source code, and it is probably difficult to compile in a modern system.

OpenSees

OpenSees is a software framework for developing applications to simulate structural and geotechnical systems mainly in the field of earthquake engineering. Forum topics https://forum.freecadweb.org/viewtopic.php?f=18&t=20745 and https://forum.freecadweb.org/viewtopic.php?f=18&t=31922


PolyFEM

PolyFEM is PolyFEM is a simple C++ and Python finite element library. We provide a wide set of common PDEs including: Laplace, Helmholtz, Linear Elasticity, Saint-Venant Elasticity, Neo-Hookean Elasticity and Stokes. Form topic https://forum.freecadweb.org/viewtopic.php?f=18&t=42857

Sparselizard

[http://www.sparselizard.org/ Sparselizard is a fast, general, multiphysics, p-adaptive, open source C++ finite element library running on Linux, Mac and Windows. It is used to design next generation microdevices (ultrasound transducers, micromirrors, microvalves, comb drives,...) and it is carefully validated against analytical solutions, third party software and measurements of the fabricated devices. AFAIS it is developed by the team of gmsh mesh generator.

SU2

SU2 is a collection of software tools developed in C++ and Python for the solution of partial differential equations (PDE) and PDE-constrained optimization problems on unstructured meshes. It is particularly used in the fields of aerodynamics and computational fluid dynamics (CFD).

Technog

Technog Professional is a closed source program to perform geotechnical simulations such as landslides, driving piles, slope stability, and civil engineering calculations (masonry and earthquake response), website (broken link).

Technog was successfully used in FreeCAD as a substitute of CalculiX, although the trial version is limited in the number of elements it can handle: Integration of tochnog solver in FreeCAD FEM (forum thread).