FEM Толщина листовой оболочки

From FreeCAD Documentation
This page is a translated version of the page FEM ElementGeometry2D and the translation is 57% complete.
Outdated translations are marked like this.

FEM ElementGeometry2D

Системное название
FEM ElementGeometry2D
Расположение в меню
Model →Shell plate tickness
Верстаки
FEM
Быстрые клавиши
C S
Представлено в версии
-
См. также
FEM tutorial

Описание

ElementGeometry2D используется для определения толщины двумерных элементов МКЭ, всех или лежащих на выбранной поверхности.

Применение

  1. There are several ways to invoke the command:
    • Press the Shell plate thickness button.
    • Select the Model → Element Geometry → Shell plate thickness option from the menu.
  2. Specify the shell thickness.
  3. Optionally press the Add button in the task panel and then click on the face you want to have a prescribed thickness. If the face selection is empty, all remaining faces (whose thickness is not defined by other FEM ElementGeometry2D objects) will be automatically assigned.

Ограничения

  • Анализ, объединяющий элементы оболочки с твердотельными или краевыми элементами, не поддерживается в текущей версии (FreeCAD 0.18).

Свойства

ДанныеThickness: specifies the thickness of the shell.

Примечания