FEM ElementFluid1D

From FreeCAD Documentation
Revision as of 08:45, 26 June 2017 by Makkemal (talk | contribs)
Jump to: navigation, search

FEM ConstraintContact.png FEM ConstraintContact

Menu location
FEM → Constraint contact
Workbenches
FEM
Default shortcut
Introduced in version
-
See also
FEM tutorial


Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

Use

  1. Click on FEM ElementFluid1D.png or choose FEMFEM ElementFluid1D.png Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html
Other languages:
English • ‎français • ‎italiano • ‎română