FEM ElementFluid1D: Difference between revisions

From FreeCAD Documentation
m (Change section to 'Usage')
No edit summary
Line 35: Line 35:
{{Docnav|[[FEM_ElementGeometry2D|Shell plate thickness]]|[[FEM_ConstraintElectrostaticPotential|Constraint electrostatic potential]]|[[FEM_Module|FEM]]|IconL=FEM_ElementGeometry2D.png|IconC=Workbench_FEM.svg|IconR=Fem-constraint-electrostatic-potential.svg}}
{{Docnav|[[FEM_ElementGeometry2D|Shell plate thickness]]|[[FEM_ConstraintElectrostaticPotential|Constraint electrostatic potential]]|[[FEM_Module|FEM]]|IconL=FEM_ElementGeometry2D.png|IconC=Workbench_FEM.svg|IconR=Fem-constraint-electrostatic-potential.svg}}


<!--T:12-->
{{FEM Tools navi}}

<!--T:13-->
{{Userdocnavi}}
</translate>
</translate>
{{FEM Tools navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
{{clear}}
{{clear}}

Revision as of 22:25, 22 February 2020

FEM ElementFluid1D

Menu location
Model → Fluid section for 1D flow
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

Usage

  1. Click on or choose Model Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The card only works with a 3 noded network element type. Information can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node54.html

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html