Difference between revisions of "FEM ElementFluid1D"

From FreeCAD Documentation
Jump to: navigation, search
Line 17: Line 17:
  
 
==Notes== <!--T:5-->
 
==Notes== <!--T:5-->
#The contact stiffness should be 10 times the young's modulus of the material for hard contact. The higher the value for contact stiffness, the harder the contact between surfaces.
+
#An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
#The slave face is the face which penetrates into the master face, and therefore experiences more deformation.
+
# The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html
#The *CONTACT PAIR card is used for modeling contact in CalculiX. The constraint uses Face-to-Face penalty contact and the contact formulation is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node112.html
 
  
 
</translate>
 
</translate>
 
{{clear}}
 
{{clear}}
 
<languages/>
 
<languages/>

Revision as of 08:43, 26 June 2017

FEM ConstraintContact.png FEM ConstraintContact

Menu location
FEM → Constraint contact
Workbenches
FEM
Default shortcut
Introduced in version
-
See also
FEM tutorial


Description

Creates a FEM fluid section element for aerodynamic and hydraulic networks

Use

  1. Click on FEM ElementFluid1D.png or choose FEMFEM ElementFluid1D.png Fluid section for 1D flow from the top menu.
  2. Select Fluid type: Liquid, Gas or Open Channel
  3. Select Section type: Pipe Manning, Pipe Inlet etc.
  4. Enter Section type parameters.
  5. Select and add edge.

Limitations

  1. The contact constraint can only be applied to two faces.

Notes

  1. An example of the set up of a hydraulic network can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node13.html
  2. The *FLUID SECTION card is used to model fluid elements for 1D flow. Information on the card can be found here: http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node205.html
Other languages:
English • ‎français • ‎italiano • ‎română