FEM ConstraintPlaneRotation: Difference between revisions

From FreeCAD Documentation
m (docnav)
(Marked this version for translation)
Line 1: Line 1:
<languages/>
<languages/>
<translate>
<translate>
<!--T:10-->
{{docnav|[[FEM_ConstraintDisplacement|Constraint displacement]]|[[FEM_ConstraintContact|Constraint contact]]|[[FEM_Module|FEM_Module]]}}
{{docnav|[[FEM_ConstraintDisplacement|Constraint displacement]]|[[FEM_ConstraintContact|Constraint contact]]|[[FEM_Module|FEM_Module]]}}


Line 28: Line 29:
#The constraint uses the *MPC card in CalculiX. The card is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node220.html
#The constraint uses the *MPC card in CalculiX. The card is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node220.html


<!--T:11-->
{{docnav|[[FEM_ConstraintDisplacement|Constraint displacement]]|[[FEM_ConstraintContact|Constraint contact]]|[[FEM_Module|FEM_Module]]}}
{{docnav|[[FEM_ConstraintDisplacement|Constraint displacement]]|[[FEM_ConstraintContact|Constraint contact]]|[[FEM_Module|FEM_Module]]}}
{{FEM Tools navi}}
{{FEM Tools navi}}

Revision as of 19:47, 7 February 2019

FEM ConstraintPlaneRotation

Menu location
Model → Mechanical Constraints → Constraint plane rotation
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM tutorial

Description

Creates a FEM constraint for keeping the nodes in a planar surface in the same plane.

How to use

  1. Click on or choose ModelMechanical Constraints Constraint plane rotation from the top menu.
  2. Select in the 3D-view the object the constraint should be applied to, which can be a face.

Limitations

  1. Plane rotation constraint can only be applied to a single planar face.
  2. When a plane rotation constraint is applied to the same face as a displacement/fixed constraint, the displacement/fixed constraint takes preference.

Notes

  1. The constraint uses the *MPC card in CalculiX. The card is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node220.html