FEM Начальное условие скорости потока

From FreeCAD Documentation
This page is a translated version of the page FEM ConstraintInitialFlowVelocity and the translation is 33% complete.
Outdated translations are marked like this.
Other languages:

Начальное условие скорости потока

Системное название
FEM_ConstraintInitialFlowVelocity
Расположение в меню
Модель → Fluid Constraints → Начальное условие скорости потока
Верстаки
FEM
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Граничное условие скорости потока

Описание

Создает ограничение начальной скорости потока для анализа потока жидкости.

Применение

  1. Press the Initial flow velocity condition button or select the menu Model → Fluid boundary conditions → Initial flow velocity condition.
  2. Enter an initial flow velocity value for the analysis. The value is entered as a combination of the 3 main cartesian vectors components (X,Y,Z).
  3. For a 3D analysis, select a 'solid' (body) from your model, for a 2D analysis select a face. However, it is also possible to select a face (e.g. the inlet of a pipe) in 3D or an edge in 2D.

Formulas

For a description how to input formulas, see section Formulas in the page for the Flow velocity constraint.

Примечания

В самых простых анализах нет необходимости указывать начальную скорость потока, однако это рекомендуется в порядке хорошего стиля работы.