FEM: Vincolo contatto

From FreeCAD Documentation
Revision as of 14:04, 4 March 2018 by Renatorivo (talk | contribs)

Vincolo contatto

Posizione nel menu
Modello → Vincoli meccanici → Vincolo contatto
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Tutorial di FEM

Descrizione

Crea un vincolo FEM di contatto tra 2 superfici.

Creates a FEM constraint for contact between 2 surfaces.

Uso

  1. Cliccare su o usare FEM Vincolo contatto dal menu principale.
  2. Selezionare la faccia principale (master).
  3. Selezionare la faccia secondaria (slave).
  4. Inserire la rigidezza del contatto.
  5. Inserire il coefficiente di attrito.
  1. Click on or choose ModelMechanical Constraints Constraint contact from the top menu.
  2. Select the master face.
  3. Select the slave face.
  4. Enter a contact stiffness.
  5. Enter a friction coefficient.

Limitazioni

  1. Il vincolo contatto può essere applicato solo a due facce.
  1. The contact constraint can only be applied to two faces.

Note

  1. La rigidezza del contatto dovrebbe essere 10 volte il modulo di Young del materiale per avere un contatto forte. Più alto è il valore di rigidezza di contatto, più è forte il contatto tra le superfici.
  2. La faccia secondaria è la faccia che penetra nella faccia principale, e subisce quindi una deformazione maggiore.
  3. Il vincolo contatto utilizza la *CONTACT PAIR card in CalculiX. Il vincolo usa il metodo Face-to-Face penalty e la formulazione del contatto è spiegata in dettaglio in http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node112.html
  1. The contact stiffness should be 10 times the young's modulus of the material for hard contact. The higher the value for contact stiffness, the harder the contact between surfaces.
  2. The slave face is the face which penetrates into the master face, and therefore experiences more deformation.
  3. The *CONTACT PAIR card is used for modeling contact in CalculiX. The constraint uses Face-to-Face penalty contact and the contact formulation is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node112.html