FEM: Vincolo contatto

From FreeCAD Documentation
Revision as of 17:42, 6 April 2017 by Renatorivo (talk | contribs) (Created page with "==Limitazioni== #Il vincolo contatto può essere applicato solo a due facce.")

Vincolo contatto

Posizione nel menu
FEM → Vincolo contatto
Ambiente
FEM
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Tutorial di FEM

Descrizione

Crea un vincolo FEM di contatto tra 2 superfici.

Uso

  1. Cliccare su File:Fem ConstraintContact.png o usare FEMFile:Fem ConstraintContact.png Vincolo contatto dal menu principale.
  2. Selezionare la faccia principale (master).
  3. Selezionare la faccia secondaria (slave).
  4. Inserire la rigidezza del contatto.
  5. Inserire il coefficiente di attrito.

Limitazioni

  1. Il vincolo contatto può essere applicato solo a due facce.

Notes

  1. The contact stiffness should be 10 times the young's modulus of the material for hard contact. The higher the value for contact stiffness, the harder the contact between surfaces.
  2. The slave face is the face which penetrates into the master face, and therefore experiences more deformation.
  3. The *CONTACT PAIR card is used for modeling contact in CalculiX. The constraint uses Face-to-Face penalty contact and the contact formulation is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node112.html