FEM ConstraintContact/fr: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/fr|Name=FEM ConstraintContact|Name/fr=FEM ConstraintContact|MenuLocation=FEM → Constraint contact||Workbenches=FEM|Shortcut=|SeeAlso=FEM_...") |
(Created page with "==Description== Crée une contrainte FEM de contact entre deux surfaces.") |
||
Line 2: | Line 2: | ||
==Description== |
==Description== |
||
Crée une contrainte FEM de contact entre deux surfaces. |
|||
==Use== |
==Use== |
Revision as of 08:09, 11 April 2017
FEM ConstraintContact |
Emplacement du menu |
---|
FEM → Constraint contact |
Ateliers |
FEM |
Raccourci par défaut |
Aucun |
Introduit dans la version |
- |
Voir aussi |
FEM tutorial |
Description
Crée une contrainte FEM de contact entre deux surfaces.
Use
- Click on or choose FEM → Constraint contact from the top menu.
- Select the master face.
- Select the slave face.
- Enter a contact stiffness.
- Enter a friction coefficient.
Limitations
- The contact constraint can only be applied to two faces.
Notes
- The contact stiffness should be 10 times the young's modulus of the material for hard contact. The higher the value for contact stiffness, the harder the contact between surfaces.
- The slave face is the face which penetrates into the master face, and therefore experiences more deformation.
- The *CONTACT PAIR card is used for modeling contact in CalculiX. The constraint uses Face-to-Face penalty contact and the contact formulation is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node112.html