Export to STL or OBJ
 Tutorial
|
| Topic |
|---|
| Export to STL or OBJ |
| Level |
| Beginner |
| Time to complete |
| 30 minutes |
| Authors |
| r-frank |
| FreeCAD version |
| 0.16.6703 |
| Example files |
| See also |
| None |
Introduction
In this tutorial we will cover how to export STL/OBJ-Files from FreeCAD.
Since the mesh-format STL/OBJ is dimensionless, FreeCAD will assume
on export that the units used in the model are mm.
If this is not the case you have to scale your model .