Draft Slope: Difference between revisions

From FreeCAD Documentation
No edit summary
(Vertical GuiCommand; see also Draft Line, Draft Wire)
Line 2: Line 2:
<translate>
<translate>
<!--T:1-->
<!--T:1-->
{{GuiCommand
{{GuiCommand|Name=Draft Slope|Workbenches=[[Draft Module|Draft]], [[Arch Module|Arch]]|MenuLocation=Draft → Utilities → Set Slope|SeeAlso=}}
|Name=Draft Slope
|MenuLocation=Draft → Utilities → Set Slope
|Workbenches=[[Draft Module|Draft]], [[Arch Module|Arch]]
|SeeAlso=[[Draft Line]], [[Draft Wire]]
}}


==Description== <!--T:2-->
==Description== <!--T:2-->

Revision as of 18:19, 20 November 2018

Draft Slope

Menu location
Draft → Utilities → Set Slope
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Line, Draft Wire

Description

This tool allows to set the slope (vertical horizontal) of selected wires or lines. By setting a slope value, all vertices after the first one will have their Z value changed so the different segments of the wires or lines will have the given inclination.

The slope value is a tangential value: 0 means horizontal, 1 means 45 degrees upwards, -1 means 45 degrees downwards, 0.577 means 30 degrees up, etc.

How to use

  1. Select one or more Wire or Line objects
  2. Select menu Draft → Utilities → File:Draft Slope.png Set Slope
  3. Set the desired value in the Slope task panel box
  4. Press the OK button