Draft Snap Midpoint

From FreeCAD Documentation
Revision as of 21:05, 22 November 2018 by Vocx (talk | contribs) (Vertical GuiCommand)

Draft Midpoint

Menu location
Draft → Snap → Midpoint
Workbenches
Draft, Arch

SeeAlso=Draft Snap

Default shortcut
None
Introduced in version
-
See also
None


Description

This snap mode lets you select the midpoint of elements.


Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near the midpoint of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected endpoint of target element


Notes

Snap mode can be used with

  • sketcher elements (lines, arcs)
  • draft elements (DWires, Lines, Arcs)
  • edges of shapes
  • edges of solids

Clicking on the snap-mode icon will toggle the snap mode on/off.