Kreslení Facebinder

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Draft Facebinder and the translation is 15% complete.
Outdated translations are marked like this.

Draft_Facebinder

Umístění Menu
Draft → Facebinder
Pracovní stoly
Kreslení, Architektura
Výchozí zástupce
F F
Představen ve verzi
-
Viz také
Nikdo

Popis

Facebinder je velmi jednoduchý objekt zkonstruovaný z vybraných ploch jiných objektů. Je parametrický, můžete upravit původní objekt a objekt facebinder se úměrně změní. Tento objekt může být použit například pro vytváření vysunutí kolekce ploch z jiných objektů. Typické použití je v architektonickém designu, vytvoření objektu, který pokrývá několik zdí. Facebinder můžete po vytvoření posunovat a otáčet a všechno zůstává propojené s původními plochami

It can be used to create an extrusion from a collection of faces. This extrusion can for example represent a wall finish in architectural design.

Facebinder created from the faces of walls

Použití

  1. Vyberte plochy objektů (pro výběr několika ploch použijte CTRL)
  2. Stiskněte tlačítko Facebinder,nebo klávesy F, F

Properties

See also: Property editor.

A Draft Facebinder object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Draft

  • ÚdajeArea (Area): (read-only) specifies the total area of the linked faces of the facebinder.
  • ÚdajeExtrusion (Distance): specifies the extrusion thickness of the facebinder.
  • ÚdajeFaces (LinkSubList): specifies the linked faces of the facebinder.
  • ÚdajeOffset (Distance): specifies an offset distance to apply between the facebinder and the original faces, prior to extrusion.
  • ÚdajeRemove Splitter (Bool): Specifies whether to remove splitter lines that divide co-planar faces of the facebinder.
  • ÚdajeSew (Bool): Specifies whether to perform a topological sewing operation on the facebinder.

View

Draft

  • PohledPattern (Enumeration): specifies the Draft Pattern with which to fill the faces of the facebinder. This property only works if PohledDisplay Mode is Flat Lines.
  • PohledPattern Size (Float): specifies the size of the Draft Pattern.

Scripting

Skriptování

Nástroj Facebinder může být použit ve skriptech Pythonu a v makrech použitím následující funkce:

facebinder = make_facebinder(selectionset)
  • Vytvoří objekt facebinder z daného výběrového setu, což je seznam vybraných objektů, tak jak je vrací metoda FreeCADGui.Selection.getSelectionEx().
  • Počítat se bude pouze s vybranými plochami.
  • Vrací nově vytvořený objekt.
PropertyLinkSubList = [tuple1, tuple2, tuple3, ...]
PropertyLinkSubList = [(object1, list1), (object2, list2), (object3, list3), ...]
PropertyLinkSubList = [(object1, ['Face1', 'Face4', 'Face6']), ...]
PropertyLinkSubList = [(object1, ('Face1', 'Face4', 'Face6')), ...]

The thickness of the Facebinder can be added by overwriting its Extrusion attribute; the value is entered in millimeters.

The placement of the Facebinder can be changed by overwriting its Placement attribute, or by individually overwriting its Placement.Base and Placement.Rotation attributes.

Příklad:

import FreeCAD as App
import FreeCADGui as Gui
import Draft

doc = App.newDocument()

# Insert a solid box
box = doc.addObject("Part::Box", "Box")
box.Length = 2300
box.Width = 800
box.Height = 1000

# selection = Gui.Selection.getSelectionEx()
selection = [(box, ("Face1", "Face6"))]
facebinder = Draft.make_facebinder(selection)
facebinder.Extrusion = 50

doc.recompute()

facebinder.Placement.Base = App.Vector(1000, -1000, 100)
facebinder.ViewObject.ShapeColor = (0.99, 0.99, 0.4)

doc.recompute()