Draft: Drawing

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Draft Drawing and the translation is 17% complete.
Outdated translations are marked like this.
THIS COMMAND IS OBSOLETE
Both the command and the Drawing Workbench it works with are not available in version 0.21 and above. Use the TechDraw Workbench and the TechDraw DraftView command instead.

Draft Drawing

poziția meniului
Drafting → Drawing
Ateliere
Draft, Arch
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
nici unul

Descriere

Acest instrument vă permite să plasați obiecte selectate pe o foaie de desne, respectiv un svg Drawing sheet. Dacă în document nu există nici o foaie sheet, aceasta va fi creată implicit. Acest instrument funcționează similar cu instrumentul Drawing View, dar este optimizat pentru obiectele Draft și poate face obiecte plane 2D cu o umplere a fațetei. De asemenea, se poate ocupa de câteva obiecte proprii atelierului Draft, cum ar fi dimensions și texts, pe care Drawing View nu le poate gestiona.

This command is similar to the Drawing View command but is optimized for Draft objects. Contrary to that command, it can handle specific objects such as Draft Dimensions and Draft Texts, and it can render faces.

This command is now obsolete. Use the TechDraw Workbench and the TechDraw DraftView command instead.

On the left the selected Draft objects. On the right the created drawing views.

Cum se folosește

  1. Selectați obiectele pe care doriți să le puneți pe o foaie de desen
  2. Apasă pe Draft Drawing button