Document structure/tr: Difference between revisions

From FreeCAD Documentation
(Created page with "FreeCAD'de en az bir açık belge varsa, her zaman bir ve sadece bir aktif belge vardır. Geçerli 3D görünümünde görünen, üzerinde çalışmakta olduğunuz belge budur.")
(Created page with "==Uygulama ve Kullanıcı Arayüzü==")
Line 11: Line 11:
FreeCAD'de en az bir açık belge varsa, her zaman bir ve sadece bir aktif belge vardır. Geçerli 3D görünümünde görünen, üzerinde çalışmakta olduğunuz belge budur.
FreeCAD'de en az bir açık belge varsa, her zaman bir ve sadece bir aktif belge vardır. Geçerli 3D görünümünde görünen, üzerinde çalışmakta olduğunuz belge budur.


==Uygulama ve Kullanıcı Arayüzü==
==Application and User Interface==


Like almost everything else in FreeCAD, the graphical user interface part (GUI) is separated from the base application part (App). This is also valid for documents. The documents are also made of two parts: the Application document, which contains our objects, and the View document, which contains the representation on screen of our objects.
Like almost everything else in FreeCAD, the graphical user interface part (GUI) is separated from the base application part (App). This is also valid for documents. The documents are also made of two parts: the Application document, which contains our objects, and the View document, which contains the representation on screen of our objects.

Revision as of 16:54, 24 December 2018


Bir FreeCAD belgesi, sahnenizdeki tüm nesneleri içerir. Herhangi bir tezgah ile yapılan grupları ve nesneleri içerebilir. Bu nedenle tezgahlar arasında geçiş yapabilir ve hala aynı belge üzerinde çalışabilirsiniz. Çalışmanızı kaydettiğinizde belge diske kaydedilecek olandır. Ayrıca FreeCAD'de aynı anda birkaç belge açabilir ve aynı belgenin birkaç görünümünü açabilirsiniz.

Belgenin içinde nesneler gruplara taşınabilir ve benzersiz bir ad alabilirler. Grupları, nesneleri ve nesne adlarını yönetmek, genellikle Ağaç görünümünden yapılır. Elbette, FreeCAD içinde yapılabilen her şeyi Python yorumlayıcıdan da yapabilirsiniz. Ağaç görünümünde, gruplar oluşturabilir, nesneleri gruplara taşıyabilir, nesneleri veya grupları silebilir, ağaç görünümünde veya bir nesneyi sağ tıklayarak, adlarını çift tıklatarak nesneleri yeniden adlandırabilir veya çalışılan tezgaha bağlı olarak diğer işlemleri yapabilirsiniz.

FreeCAD belgesindeki nesneler farklı türlerde olabilir. Her tezgah kendi nesne türlerini yaratabilir, örneğin Kafes tezgahı kafes nesnelerini yaratır, Parça tezgahı Parça nesnelerini yaratır , Taslak Tezgâhı ayrıca Parça nesnelerini yaratır vb.

FreeCAD'de en az bir açık belge varsa, her zaman bir ve sadece bir aktif belge vardır. Geçerli 3D görünümünde görünen, üzerinde çalışmakta olduğunuz belge budur.

Uygulama ve Kullanıcı Arayüzü

Like almost everything else in FreeCAD, the graphical user interface part (GUI) is separated from the base application part (App). This is also valid for documents. The documents are also made of two parts: the Application document, which contains our objects, and the View document, which contains the representation on screen of our objects.

Think of it as two spaces, where the objects are defined. Their constructive parameters (is it a cube? a cone? which size?) are stored in the Application document, while their graphical representation (is it drawn with black lines? with blue faces?) are stored in the View document. Why is that? Because FreeCAD can also be used without graphical interface, for example, inside other programs, and we must still be able to manipulate our objects, even if nothing is drawn on the screen.

Another thing that is contained inside the View document are 3D views. One document can have several views opened, so you can inspect your document from several points of view at the same time. Maybe you would want to see a top view and a front view of your work at the same time? Then, you will have two views of the same document, both stored in the View document. Creating new views or closing views can be done from the View menu or by right-clicking on a view tab.

Scripting

Documents can be easily created, accessed and modified from the Python interpreter. For example:

FreeCAD.ActiveDocument

Will return the current (active) document

FreeCAD.ActiveDocument.Blob

Would access an object called "Blob" inside your document

FreeCADGui.ActiveDocument

Will return the view document associated to the current document

FreeCADGui.ActiveDocument.Blob

Would access the graphical representation (view) part of our Blob object

FreeCADGui.ActiveDocument.ActiveView

Will return the current view