Basic Sketcher Tutorial: Revision history

14 April 2023

• curprev 13:0413:04, 14 April 2023‎ Roy 043 talk contribs‎ 21,317 bytes −36‎ Removed Tutorials_navi

23 April 2020

• curprev 19:3519:35, 23 April 2020‎ Renatorivo talk contribs‎ 21,353 bytes +12‎ Marked this version for translation
• curprev 03:1303:13, 23 April 2020‎ Vocx talk contribs‎ 21,341 bytes −1‎ Now exit construction mode by clicking again on Toggle construction.
• curprev 03:0903:09, 23 April 2020‎ Vocx talk contribs‎ 21,342 bytes +214‎ Make sure you are not in construction mode by clicking on Toggle construction, if you have not previously exited this mode.

23 February 2020

• curprev 21:2221:22, 23 February 2020‎ Gnrc talk contribs‎ 21,128 bytes +539‎ Marked this version for translation
• curprev 17:4117:41, 23 February 2020‎ Vocx talk contribs‎ 20,589 bytes −10‎ A closed sketch is normally used to create a face or a profile to be extruded into a solid body with an operation such as PartDesign Pad.
• curprev 08:5008:50, 23 February 2020‎ Vocx talk contribs‎ 20,599 bytes +70‎ →‎Additional information: In general, it is recommended to use geometrical constraints first, and minimize the number of datum constraints, as this simplifies the task of the internal constraint solver.
• curprev 08:3408:34, 23 February 2020‎ Vocx talk contribs‎ 20,529 bytes +36‎ File pointing to the forum thread
• curprev 08:2808:28, 23 February 2020‎ Vocx talk contribs‎ 20,493 bytes −1‎ File:00_Sk01_Sketcher_fully_constrained_final.png
• curprev 08:2408:24, 23 February 2020‎ Vocx talk contribs‎ 20,494 bytes +147‎ Better information for the GuiCommand template
• curprev 08:1908:19, 23 February 2020‎ Vocx talk contribs‎ 20,347 bytes +34‎ New image: File:09b_Sk01_Sketcher_fully_constrained_clean.png
• curprev 08:1308:13, 23 February 2020‎ Vocx talk contribs‎ 20,313 bytes +199‎ →‎Extrusion: Left: fully constrained sketch with only the most important constraints showing. Right: solid extrusion produced with PartDesign Pad.
• curprev 08:0408:04, 23 February 2020‎ Vocx talk contribs‎ m 20,114 bytes −1‎ →‎Radius
• curprev 07:5507:55, 23 February 2020‎ Vocx talk contribs‎ 20,115 bytes +742‎ Sections, and new images with captions.
• curprev 07:2807:28, 23 February 2020‎ Vocx talk contribs‎ 19,373 bytes +259‎ Subsections for the constraints, and new images
• curprev 07:1207:12, 23 February 2020‎ Vocx talk contribs‎ 19,114 bytes +37‎ Two subsection for outer arcs and inner arcs
• curprev 07:0607:06, 23 February 2020‎ Vocx talk contribs‎ 19,077 bytes +41‎ Again the dimension will be fixed later.
• curprev 06:4906:49, 23 February 2020‎ Vocx talk contribs‎ 19,036 bytes 0‎ Image x400px
• curprev 06:4306:43, 23 February 2020‎ Vocx talk contribs‎ 19,036 bytes 0‎ Image x400px
• curprev 06:3706:37, 23 February 2020‎ Vocx talk contribs‎ 19,036 bytes 0‎ Image x400px
• curprev 05:4305:43, 23 February 2020‎ Vocx talk contribs‎ 19,036 bytes +1,936‎ For a more in depth description of the sketcher, visit the Sketcher Workbench documentation and also read the Sketcher reference.
• curprev 05:0705:07, 23 February 2020‎ Vocx talk contribs‎ 17,100 bytes +717‎ Number 8 disappeared, so number 9 became number 8.
• curprev 04:0604:06, 23 February 2020‎ Vocx talk contribs‎ 16,383 bytes +662‎ Captions for all images
• curprev 03:5803:58, 23 February 2020‎ Vocx talk contribs‎ 15,721 bytes +369‎ →‎Constraints: Better information
• curprev 03:2303:23, 23 February 2020‎ Vocx talk contribs‎ 15,352 bytes +131‎ To summarize, the O-arcs should have their "bump" pointing outwards, and their concavity pointing towards the origin of the sketch; the I-arcs should have their bump pointing inwards, and their concavity pointing away from the same origin.
• curprev 02:4402:44, 23 February 2020‎ Vocx talk contribs‎ 15,221 bytes −128‎ For a more in depth description of the sketcher, read the Sketcher reference.
• curprev 01:3901:39, 23 February 2020‎ Vocx talk contribs‎ 15,349 bytes +358‎ New images and text
• curprev 01:1401:14, 23 February 2020‎ Vocx talk contribs‎ 14,991 bytes +1,636‎ New images. New text.
• curprev 00:2000:20, 23 February 2020‎ Vocx talk contribs‎ 13,355 bytes +380‎ New images added, and a few fixes in the text

22 February 2020

• curprev 23:3023:30, 22 February 2020‎ Vocx talk contribs‎ 12,975 bytes +294‎ Updated information and images
• curprev 23:2223:22, 22 February 2020‎ Vocx talk contribs‎ 12,681 bytes +1,019‎ More information and images
• curprev 22:5322:53, 22 February 2020‎ Vocx talk contribs‎ 11,662 bytes +99‎ New image, some rewording
• curprev 22:4222:42, 22 February 2020‎ Vocx talk contribs‎ 11,563 bytes −315‎ Simplified information. The arcs are still not touching.
• curprev 22:2222:22, 22 February 2020‎ Vocx talk contribs‎ 11,878 bytes +702‎ Renamed to construction geometry. "Take a look at the task panel again. Look at the Constraints and Elements sections to see the new listed constraints and lines."
• curprev 21:5421:54, 22 February 2020‎ Vocx talk contribs‎ 11,176 bytes +82‎ Other options can be changed in this panel, including the size of the visible grid, and whether we want to snap to it.
• curprev 19:5719:57, 22 February 2020‎ Vocx talk contribs‎ 11,094 bytes +259‎ You should end up with a fully constrained sketch. It can be confirmed by noticing the change in color of all curves. Still not finished. More to come.
• curprev 19:4719:47, 22 February 2020‎ Vocx talk contribs‎ 10,835 bytes +183‎ As of this step, we have now created a closed profile that can be adjusted with fixed dimensions. While the dimensions remain unfixed, you can select a point and drag it with the pointer to observe how the entire sketch changes.
• curprev 19:3919:39, 22 February 2020‎ Vocx talk contribs‎ 10,652 bytes +29‎ The reader will practice: Obtaining a closed profile
• curprev 19:3619:36, 22 February 2020‎ Vocx talk contribs‎ 10,623 bytes +526‎ As of this step, we have now created a closed profile that can be adjusted with the desired dimensions.
• curprev 19:1319:13, 22 February 2020‎ Vocx talk contribs‎ 10,097 bytes +116‎ The existing geometry, that is the center point of the arcs, or the endpoint of the construction lines, may move automatically so that the new arc is created and effectively ties the two A-arcs together.
• curprev 19:0119:01, 22 February 2020‎ Vocx talk contribs‎ 9,981 bytes +71‎ Repeat this procedure until you've created five construction lines in a star pattern. Don't worry too much about their size or position, just extend them in the four quadrants.
• curprev 18:5818:58, 22 February 2020‎ Vocx talk contribs‎ 9,910 bytes −4‎ Press the right mouse button, or press Esc in the keyboard once, to deselect the active tool in edit mode.
• curprev 07:1407:14, 22 February 2020‎ Vocx talk contribs‎ 9,914 bytes +3,413‎ Updated information. Will continue rewriting and provide images.
• curprev 05:1605:16, 22 February 2020‎ Vocx talk contribs‎ 6,501 bytes +332‎ A closed sketch is normally used to create a face or a profile which will be subsequently extruded into a solid body with an operation such as PartDesign Pad.

21 February 2020

• curprev 23:0523:05, 21 February 2020‎ Vocx talk contribs‎ 6,169 bytes +35‎ Move sections one level up. Add the templates to categorize the page.

18 February 2020

• curprev 20:5220:52, 18 February 2020‎ Kunda1 talk contribs‎ m 6,134 bytes 0‎ Kunda1 moved page Sketcher tutorial to Basic Sketcher Tutorial without leaving a redirect: Part of translatable page "Sketcher tutorial"
• curprev 20:5020:50, 18 February 2020‎ Kunda1 talk contribs‎ m 6,134 bytes +61‎ png to svg + refinements

26 November 2018

• curprev 00:0100:01, 26 November 2018‎ Renatorivo talk contribs‎ 6,073 bytes +12‎ Marked this version for translation
• curprev 00:0100:01, 26 November 2018‎ Renatorivo talk contribs‎ 6,061 bytes +47‎ No edit summary

4 November 2018

• curprev 19:5419:54, 4 November 2018‎ Renatorivo talk contribs‎ 6,014 bytes +6‎ No edit summary