Arch Кольцевая арматура

From FreeCAD Documentation
(Redirected from Arch Rebar Stirrup/ru)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Reinforcement StirrupRebar and the translation is 24% complete.
Outdated translations are marked like this.

Кольцевая арматура

Системное название
Arch_Rebar_Stirrup
Расположение в меню
Arch → Rebar tools → Stirrup
3D/BIM → Reinforcement tools → Stirrup
Верстаки
Arch, BIM
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Reinforcement, Арматура по эскизу, Спиральная арматура

Описание

Инструмент Stirrup Rebar позволяет пользователю создавать в структурном элементе арматурный стержень с изогнутой формой.

This tool is part of the Reinforcement Workbench, an external workbench that can be installed with the Addon Manager.

Применение

  1. Создайте элемент structure
  2. Выберите любую грань структуры
  3. Then select Stirrup Rebar from the rebar tools
  4. A task panel will pop-out on the left side of the screen as shown below
  5. Select the desired orientation
  6. Give the inputs like left cover, right cover, top cover, bottom, front cover, bent angle, bent factor, rounding and diameter of the rebar
  7. Select the mode of distribution either amount or spacing
  8. If spacing is selected, a user can also opt for custom spacing
  9. Pick selected face is used to verify or change the face for rebar distribution
  10. Нажмите OK или Apply, чтобы создать арматуру
  11. Нажмите Cancel, чтобы выйти из панели задач

Task panel for the tool

Свойства

  • ДанныеFront Cover:

Расстояние между арматурой и выбранной поверхностью.

  • ДанныеRight Cover: The distance between the right end of the rebar to right face of the structure.
  • ДанныеLeft Cover: The distance between the left end of the rebar to the left face of the structure.
  • ДанныеBottom Cover: The distance between rebar from the bottom face of the structure.
  • ДанныеTop Cover: The distance between rebar from the top face of the structure.
  • ДанныеBent Angle: Bent angle defines the angle at the ends of a stirrup.
  • ДанныеBent Factor: Bent Factor defines length of stirrup end.
  • ДанныеAmount: The amount of rebars.
  • ДанныеSpacing:Расстояние между осями каждого стержня.

Сценарии

See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.

Инструмент Stirrup Rebar можно использовать в macros и на консоли python с помощью следующей функции:

Rebar = makeStirrup(l_cover, r_cover, t_cover, b_cover, f_cover,
                    bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
                    structure=None, facename=None)
  • Creates a Rebar object from the given structure, which is an Arch Structure, and facename, which is a face of that structure.
    • If no structure nor facename are given, it will take the user selected face as input.
  • l_cover, r_cover, t_cover, b_cover, and f_cover are inner offset distances for the rebar elements with respect to the faces of the structure. They are respectively the left, right, top, bottom, and front offsets.
  • diameter is the diameter of the reinforcement bars inside the structure.
  • rounding is the parameter that determines the bending radius of the reinforcement bars as they make a loop.
  • bentLength and bentAngle define the length and angle of the tip of the reinforcement loop.
  • amount_spacing_check if it is True it will create as many reinforcement loops as given by amount_spacing_value; if it is False it will create reinforcement loops separated by the numerical value of amount_spacing_value.
  • amount_spacing_value specifies the number of reinforcement loops, or the value of the separation between them, depending on amount_spacing_check.

Пример

import Draft, Arch, Stirrup

# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure = Arch.makeStructure(Rect, height=1600)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = Stirrup.makeStirrup(20, 20, 20, 20, 20,
                            115, 4, 8, 2, True, 10, Structure, "Face6")

Edition of the rebar

You can change the properties of the rebar with the following function:

editStirrup(Rebar, l_cover, r_cover, t_cover, b_cover, f_cover,
            bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
            structure=None, facename=None)
  • Rebar is a previously created StirrupRebar object.
  • The other parameters are the same as required by the makeStirrup() function.
  • structure and facename may be omitted so that the rebar stays in the original structure.
import Stirrup

Stirrup.editStirrup(Rebar, 20, 20, 20, 20, 50,
                    100, 4, 14, 8, True, 8)