Sketcher SelectElementsWithDoFs/ro

From FreeCAD Documentation
This page is a translated version of the page Sketcher SelectElementsWithDoFs and the translation is 8% complete.
Outdated translations are marked like this.

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Sketcher Select solver DoFs

poziția meniului
Sketch → Instrumente pentru schiţe → Select solver DoFs
Ateliere
Sketcher
scurtătură
nici unul
Prezentat în versiune
0.18
A se vedea, de asemenea,
nici unul

Descriere

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

Usage

In the Solver messages box located at the top of the Tasks tab, the following message(s) should be displayed:

  • In case of an under-constrainend sketch:

Under-constrained sketch with X degrees of freedom

where "X" is the number of degrees of freedom remaining in the sketch; you will receive more information if you click on the blue link, or if you use the menu.

  1. The elements which have degrees of freedom are now highlighted in green.
  2. Click anywhere in the sketch to clear the highlight color.
  • In case of a fully-constrainend sketch:

Fully constrained sketch