Sketcher: Polilinie
Outdated translations are marked like this.
|
|
| poziția meniului |
|---|
| Sketch → Sketcher geometries → Create polyline |
| Ateliere |
| Sketcher |
| scurtătură |
| nici unul |
| Prezentat în versiune |
| - |
| A se vedea, de asemenea, |
| Sketcher Line |
Descriere
Această unealtă funcționează ca un instrument Sketcher CreateLine, dar crează linii și arce de cerc conectate prin vârfuri/vertex-uri. Când pornește instrumentul, indicatorul mouse se modifică într-o cruce albă și o iconiță roșie tip polilinie. coordonatele indicatorului sunt afișate alături în albastru și în timp real.
Polyline începe cu o linie, un arc de cerc tangent, un arc de cerc perpendicular și apoi cu o linie tangentă
Cum se folosește
See also: Drawing aids.
- There are several ways to invoke the tool:
- Press the
Create polyline button. - Select the Sketcher → Sketcher geometries → Create polyline option from the menu.
- Right-click in the 3D view and select the Create polyline option from the context menu.
- Use the keyboard shortcut: G then M.
- Press the
- The cursor changes to a cross with the tool icon.
- The modes of the tool require a previous segment. Do one of the following:
- Pick two points to define a line segment.
- Pick the endpoint of an existing line or arc segment (Auto constraints must be enabled).
- Optionally press the M key one or more times to cycle through the modes for the next segment. The available modes are:
- Line perpendicular to the previous segment.
- Line tangential to the previous segment (this is the initial mode if the previous segment is an arc).
- Arc tangential to the previous segment.
- Arc perpendicular (left) to the previous segment.
- Arc perpendicular (right) to the previous segment.
- Line only connected to the previous segment.
- While in any of the arc modes, optionally hold down the Ctrl key to snap the arc to increments of 45° relative to the previous segment.
- Pick the endpoint of the segment.
- Optionally repeat this to create more segments.
- To finish the input do one of the following:
- Snap to the start point to create a closed polyline.
- Right-click or press Esc to create an open polyline.
- The polyline segments have been created and applicable constraints have been added.
- If the tool runs in continue mode:
- Optionally keep creating polylines.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
Sketcher
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub