Sketcher ConstrainEqual/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainEqual and the translation is 11% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎日本語 • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska
Arrow-left.svg Previous: Constraint Tangent.png Tangent
Next: Symmetric Sketcher ConstrainSymmetric.png Arrow-right.svg

Sketcher ConstrainEqual.png Sketcher ConstrainEqual

Menu location
Sketch → Sketcher constraints → Constrain equal
Workbenches
Sketcher
Default shortcut
E
Introduced in version
-
See also
Constrain radius


Описание

Ограничение Constrain Equal заставляет два или более отрезка в линии, ломаной линии или прямоугольнике иметь одинаковую длину. При применении к дугам или окружностям радиусы ограничены, чтобы быть равными. Его нельзя применять к геометрическим примитивам, которые не относятся к одному и тому же типу (например, отрезки и дуги).

Oперация

The example sketch below contains a number of sketch primitives (line,poly-line, rectangle, arc and circle).

EqualConstraint1.png

Select two or more line segments (e.g. line and one side of the rectangle).

EqualConstraint2.png

Click on Sketcher ConstrainEqual.png Constrain equal in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.

EqualConstraint3.png

Now select the arc and the circle in the sketch.

EqualConstraint4.png

and apply Sketcher ConstrainEqual.png Constrain equal as before.

EqualConstraint5.png

Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle

EqualConstraint6.png

and apply Sketcher ConstrainEqual.png Constrain equal as before.

EqualConstraint7.png

Select the line segment and the arc

EqualConstraint8.png

and apply Sketcher ConstrainEqual.png Constrain equal as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).

EqualConstraint9.png

Arrow-left.svg Previous: Constraint Tangent.png Tangent
Next: Symmetric Sketcher ConstrainSymmetric.png Arrow-right.svg