Path ToolController

From FreeCAD Documentation
Jump to: navigation, search
This page contains changes which are not marked for translation.

This documentation is not finished. Please help and contribute documentation.

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

A tool controller carries properties for how a tool should be used in one or more operations.

For example a tool, like a 1/4 inch cutter can run at many different spindle speeds and feed rates. The same tool might be used in different ways in the same job.

properties:

feed speed (h) feed speed (v)

rapid speed (h) rapid speed (v)

Spindle Speed (rpm) Spindle direction (forward/reverse)

Tool Number