CAM Simulator
Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.
Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).
Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.
|
|
| Menu location |
|---|
| CAM → CAM Simulator |
| Workbenches |
| CAM |
| Default shortcut |
| P M |
| Introduced in version |
| - |
| See also |
| CAM Inspect |
Beschreibung
The 
Simulator tool allows Simulation of the CAM Job by sweeping 3D Models of the Tools used in each Operation, along the G-Code paths, subtracting material from the Stock, where the stock and tool overlap, providing visualization of the Job. This allows detection and isolation of errors prior to running the Job on a mill.
Anwendung
- There are several ways to invoke the command:
- Press the
CAM Simulator button. - Select the CAM → CAM Simulator option from the menu.
- Use the keyboard shortcut: P then M.
- Press the
- De-select any Operations that are not to be simulated
- Tune the Speed and Accuracy settings.
- Select the Job for simulation from the drop menu.
- Use the Path Simulator toolbar to invoke different actions:
- Press the
(Play) button to play or playback an animation of the operations. - Press the
(Fast Forward) button to increase the speed substantially (in order to quickly review complicated paths). - Press the
(Pause) button to pause animation for troubleshooting purposes - Press the
(Single-Step) button for slowing down the animation, this functionality helps troubleshooting and resolving specific cuts and/or movements. - Press the
(Stop) button to stop the animation.
- Press the
- Press the Cancel button will remove the stock created for the simulation. If you press OK this object will be kept in your Job.
Eigenschaften
- DatenPlayback Speed: The speed of the simulation playback, in G-code lines/second
- DatenAccuracy: The accuracy of the simulation expressed as a percentage indicating the simulations deviation from the Job. For interactive simulation, reducing accuracy to 0.3 works much faster.
- DatenJob: The Job used as the basis of the simulation
- DatenOperation List: The list of Operations selected for inclusion in the simulation.
CAM
- Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template
- Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web