Измерить угол
Outdated translations are marked like this.
Измерить угол |
Системное название |
---|
Part Measure Angular |
Расположение в меню |
Measure → Измерить угол |
Верстаки |
Part |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Description
This command measures the angle between two straight edges, two planar faces or one straight edge and a planar face and displays the measurement in the 3D view.
The appearance of the measurements can be changed in the preferences.
Usage
- Select two straight edges, two planar faces or one straight edge
- There are several ways to invoke the command:
- Press the Measure Angular button.
- Select the Measure → Measure Angular option from the menu.
- Alternatively the command can be launched without prior selection. A selection dialog then opens in the Task panel. A Control widget also provides buttons to reset the selection, toggle the measurement display in the 3D view, and clear all measurements.
- Measurements are automatically discarded when closing the document.
Notes
- You cannot use the Draft snap tools with this command.
- To add dimensions to drawings use the dimension tools from the TechDraw Workbench.
- For more comprehensive measuring tools, install the Manipulator Workbench (an external workbench).
Part
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web