매뉴얼:소개

From FreeCAD Documentation
This page is a translated version of the page Manual:Introduction and the translation is 50% complete.
Outdated translations are marked like this.


150
150


FreeCAD는 3차원 모형의 치수를 매개변수를 이용해 적용하여 모델링 하는 프로그램이며 소스코드는 개방 되어 있습니다. 실제의 물건, 소형의 전자부품에서 대형인 건물과 토목 구조물 등에 이르기 까지, 3D 형상 제작을 위한 것이며, 3D 프린팅에 사용되는 것에 중점을 두고 만들었습니다. FreeCAD 는 사용하기, 내려받기, 개량해서 배포하기 등 여러가지에 관해 여러분의 자유를 허용하고 있고, 소스코드도 LGPL의 권리조항에서 개방된 것에 따라 공개되고 게시 되었습니다. FreeCAD를 이용하여 여러분이 만든 것은 완전히 여러분의 소유물이며, 프리캐드 없이 수정할 수 있습니다

FreeCAD는 근본적으로 사회적 프로젝트이며, FreeCAD에 대한 열정으로 개발자와 사용자 커뮤니티가 개발하고 유지 관리합니다.

This manual is an experiment, taking a different approach from the official FreeCAD documentation wiki. The wiki is written collaboratively by dozens of community members. Like most wikis, it contains huge amounts of information but is somewhat difficult to access and navigate by newcomers. This makes it an excellent resource for reference, but a less practical tool for learning FreeCAD. This manual will walk you through much of the information available on the wiki, but we hope the step-by-step approach based on examples and a more unified tone due to a smaller number of authors will make it more suitable for a first contact with FreeCAD. It will become a companion for the wiki, but not replace it.

이 매뉴얼은 FreeCAD의 최신 안정 버전 0.18(2019년 초반)용으로 썼습니다.

The contents of this manual are published under the Creative Commons 4.0 license, and can be freely used, downloaded, copied, and modified. The source files for this manual are hosted on this wiki, and on the original github account used to write the first version of this book. Easier to read HTML, PDF, MOBI and EPUB versions are also available here. A printed version is being prepared.