|Toolbars → Create a planar image in the 3D space|
|Introduced in version|
|Image Open, Image Scaling|
How to use
- Press the button.
- Select the desired image in your system.
- Choose the plane where the image will be placed, give an offset value, and press .
The resulting ImagePlane object uses the ratio of 1 pixel to 1 millimeter; in order for the image to display well, it should have enough resolution.
When importing the image, you may wish to add an offset of
-0.1 mm in order to place the image slightly behind the working plane; this will make it easy to trace (draw on top) the image with the Draft or Sketcher tools.
If no offset is given to the image initially, its position can still be adjusted in the property editor.
- DataPosition: specifies the coordinates of the base point of the image plane.
- DataAngle: specifies the angle of rotation of the image plane.
- DataAxis: specifies the axis used for the rotation angle.
- DataXSize: specifies the width of the image plane.
- DataYSize: specifies the height of the image plane.
- DataImage Plane: specifies the image to use for this plane.