FEM CalculiX
Contents
Preface
This page collects information on the CalculiX finite element solver, the default solver in the FEM Workbench for structural and thermo-mechanical analysis as of FreeCAD 0.17. Depending on the operating system you are working with, you'll need to install CalculiX before running your first simulation. Please see FEM Install.
The solver is able to do linear and non-linear calculations, for static, dynamic, and thermal problems. The solver operates on an Abaqus input file (.inp
), which means it can be used with different pre-processors that support this format. The program includes its own graphical preprocessor which, however, is not used by FreeCAD, only the solver itself.
CalculiX is designed to run on Unix platforms like Linux and Irix computers but also on MS-Windows. CalculiX was developed by engineers from MTU Aero Engines, Munich, Germany, to assist them in designing machinery such as jet turbines. The software is currently released to the public on the terms of the GPL version 2.
Integration with FreeCAD
Interaction between the FEM Workbench and CalculiX is done through writing and reading text files. The sequence of operations is as follows:
- A CalculiX input file is created with details required to run the simulation
- The CalculiX solver is started with this input file
- The output from the solver is logged
- The output files from the solver are read, if they are available
The FEM Control Solver tool manages the whole process. User interaction in the process is possible.
Preprocessing interface
The input file that CalculiX uses can be prepared and edited before the solver is started. The units used in the input file are independent of the units set in FreeCAD; they will always be millimeters (mm) and Newton (N).
(ToDo: check this. What happens with the mesh if inch is used in FreeCAD? As density was introduced, with this we have kg and s and no longer N?! how about this?!)
The CalculiX interface supports the following objects:
FEM Elements
- Tet4 and Tet10
- S3 and S6
- B31 and B32
- and those described in FEM Mesh CalculiX
Analysis
- Linear static analysis
- Frequency analysis
- Coupled thermal-structural analysis
Materials
- One linear elastic isotropic material (uniformity in all directions)
- Multiple material use is in development
Postprocessing interface
The FEM Workbench can read the resulting stress (Von Mises) and all displacements
- Materials: Solid, Fluid, Nonlinear mechanical; Material editor
- Element geometry: Beam (1D), Beam rotation (1D), Shell (2D), Fluid flow (1D)
Constraints
- Electrostatic: Potential
- Fluid: Initial velocity, Fluid boundary, Flow velocity
- Mechanical: Fixed, Displacement, Plane rotation, Contact, Transform, Force, Pressure, Self weight, Bearing, Gear, Pulley
- Thermal: Initial temperature, Heat flux, Temperature, Heat source
- Solve: Calculix tools, CalculiX, Elmer, Z88; Equations: Heat, Elasticity, Electrostatic, Fluxsolver, Flow; Solver: Solver control, Solver run
- Results: Purge, Show; Postprocessing: Apply changes, Pipeline from result, Create warp vector filter, Create scalar clip filter, Create cut filter, Create clip filter, Create data along line filter, Create linearized stresses,
Create data at point filter, Create functions
- Utilities: Clipping plane, Remove clipping planes; Mesh clear, Mesh print info
- Additional: Preferences; FEM Install, FEM Mesh, FEM Solver, FEM CalculiX, FEM Project, FEM Concrete; FEM Element Types