View Issue Details

IDProjectCategoryView StatusLast Update
0002981FEM[FreeCAD] Featurepublic2018-09-26 19:52
Reporterkkremitzki Assigned To 
PrioritynormalSeverityfeatureReproducibilityhave not tried
Status confirmedResolutionopen 
Product Version 
Target VersionFixed in Version 
Summary0002981: FEM, GUI, constraint force should display units
DescriptionObject FemConstraintForce needs to display appropriate units when applied as a point load, line load, or area load.

Ideally, if line load or area load is selected, the appropriate length or area should display.

An optional checkbox to input normalized force would be good too. So a user input of F newtons automatically gets converted to create the correct ConstraintForce which is a line load F/l on a line of length l, or an area load F/A when a face with area A is selected.
Tags#lowhangingfruit, units
FreeCAD Information

Activities

berndhahnebach

2017-03-29 11:51

developer   ~0008730

Good point. Fully agree.

Kunda1

2017-05-02 21:16

administrator   ~0008857

Confirming based on bernd's response

Issue History

Date Modified Username Field Change
2017-03-23 02:08 kkremitzki New Issue
2017-03-23 02:09 kkremitzki Tag Attached: #lowhangingfruit
2017-03-23 08:55 Kunda1 Tag Attached: units
2017-03-29 11:52 berndhahnebach Note Added: 0008730
2017-05-02 21:16 Kunda1 Status new => confirmed
2017-05-02 21:16 Kunda1 Note Added: 0008857
2017-05-27 09:59 berndhahnebach Summary FEM ConstraintForce should display units => FEM, GUI, ConstraintForce should display units
2018-03-12 09:36 wmayer Target Version 0.17 => 0.18
2018-09-18 06:11 berndhahnebach Summary FEM, GUI, ConstraintForce should display units => FEM, GUI, constraint force should display units
2018-09-18 06:11 berndhahnebach Description Updated View Revisions
2018-09-25 18:34 berndhahnebach Severity minor => feature
2018-09-26 19:52 berndhahnebach Target Version 0.18 =>