View Issue Details

IDProjectCategoryView StatusLast Update
0002795DraftFeaturepublic2021-02-06 06:45
ReporterTomV Assigned Toyorik  
PrioritynormalSeverityminorReproducibilityhave not tried
Status assignedResolutionopen 
PlatformLinuxOSUbuntuOS Version16.0
Product Version0.17 
Target Version0.20 
Summary0002795: Allow cherrypicking individual lines from a sketch when creating a wall
DescriptionMy current (noob) workflow is as follows:
1. create a single monster sketch with the floorplan of my house
2. then draw draft rectangle over the sketch lines to specify walls
3. then convert those draft rectangles into a wall

It's not possible to select lines from the sketch directly, which makes step number 2 necessary. If you select a single line from the sketch and then press 'wall', all lines of the sketch are converted into a wall.

My RFE is to make it possible to specify select lines from a sketch.
Steps To ReproduceN/A
TagsNo tags attached.
FreeCAD Information

Activities

yorik

2016-11-29 14:14

administrator   ~0007498

That could be a good thing indeed. Will try to think a bit about how to do it (users must be able to pick the whole object as well)

yorik

2022-03-03 13:55

administrator   ~0016510

This ticket has been migrated to GitHub as issue 5675.

Issue History

Date Modified Username Field Change
2016-11-26 18:57 TomV New Issue
2016-11-29 14:14 yorik Note Added: 0007498
2016-11-29 14:14 yorik Assigned To => yorik
2016-11-29 14:14 yorik Status new => assigned
2018-01-12 15:31 yorik Target Version => 0.18
2019-02-14 23:50 yorik Target Version 0.18 => 0.19
2021-02-06 06:45 abdullah Target Version => 0.20